Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
いつでもどこでも印刷
あなたのスプロケットプリンターで
いつでもどこでも印刷
あなたのスプロケットプリンターで
SELECT YOUR HP SPROCKET
EASY SETUP
Start printing with your HP Sprocket Select in just a few simple steps!
Install App
Install the HP Sprocket app to begin setup.
Load Paper
Lift the lid to remove. Load the orange card barcode-down and the photo paper with the HP logos facing down.
What is the orange card for?
Learn more
Charge & Power On
Install the HP Sprocket app to begin setup.
Load paper
Lift the lid to remove. Load the orange card barcode-down and the photo paper with the HP logos facing down.
Install App
Install the HP Sprocket app to begin setup.
Load Paper
Lift the lid to remove. Load the orange card barcode-down and the photo paper with the HP logos facing down.
What is the orange card for?
Learn moreCharge & Power On
Plug in the USB cord to charge and automatically power on the printer. When not charging, press and hold the power button until the LEDs light up.
Get Connected
Bluetooth® and printer turned on? Connect your mobile device to the printer.
CUSTOMIZE
Customize your photos with the HP Sprocket app.
PRINT AND SHARE
The HP Sprocket Select printer lets you capture and share fun-filled moments with vibrant prints. Enjoy all your prints on sticky-backed HP Sprocket Photo Paper.
SHARED PRINT QUEUE
With Shared Print Queue, multiple people can send images to one printer using a Shared Print Queue. With HP Sprocket Select, you and up to 3 friends can connect directly using Bluetooth to a Shared Queue at the same time! A Host must be connected to the printer to initiate the Shared Queue.
Print Quality TipsGET FAMILIAR WITH YOUR HP SPROCKET SELECT
User Guide and MoreHP Sprocket Select Support
EASY SETUP
Start printing with your HP Sprocket Studio Plus in just a few simple steps!
Plug In + Power On
Connect the power cord to the printer and plug it in. Press and hold the power button on the side of the printer until the light above the paper tray turns on. Do you have a Sprocket Studio Plus Power Bank?
Load Paper
Lift the paper tray cover and place the photo paper in the tray, shiny-side facing up. Be careful not to touch the shiny side of the paper. Make sure to buy HP Sprocket 4 x 6” (102 x 152 mm) Photo Paper and
Cartridges for your HP Sprocket Studio Plus --the cartridge and paper are sold together!
Install Cartridge
Open the printer side-door and insert the cartridge into the slot until it clicks. Close the door. Do not touch or cut the film on the cartridge.
Check Behind the Printer
Make sure the power cord, battery, or other items don’t block the back of the printer. Allow at least 5 inches (12.7 cm) of space when printing. The photo will emerge multiple times from the printer. Do not tug
or touch the print until it ejects completely.
Get Connected
Use Bluetooth® to connect to your printer. The HP Sprocket app will help you pair during the in-app setup instructions. If you have already set up your printer, open the Main Menu, tap “sprocket”, then choose
“Manage Printers” and tap “Add New Printer”. Choose your printer to connect.
Plug In + Power On
Connect the power cord to the printer and plug it in. Press and hold the power button on the side of the printer until the light above the paper tray turns on. Do you have a Sprocket Studio Power Bank?
Load Paper
Lift the paper tray cover and place the photo paper in the tray, shiny-side facing up. Be careful not to touch the shiny side of the paper. Make sure to buy HP Sprocket 4 x 6” (102 x 152 mm) Photo Paper and
Cartridges for your HP Sprocket Studio--the cartridge and paper are sold together!
Install Cartridge
Open the printer side-door and insert the cartridge into the slot until it clicks. Close the door. Do not touch or cut the film on the cartridge.
Check Behind the Printer
Make sure the power cord, battery, or other items don’t block the back of the printer. Allow at least 5 inches (12.7 cm) of space when printing. The photo will emerge multiple times from the printer. Do not tug
or touch the print until it ejects completely.
Get Connected
Use Bluetooth® to connect to your printer. The HP Sprocket app will help you pair during the in-app setup instructions. If you have already set up your printer, open the Main Menu, tap “sprocket”, then choose
“Manage Printers” and tap “Add New Printer”. Choose your printer to connect.
CUSTOMIZE
Customize your photos with the HP Sprocket app.
SHARED PRINT QUEUE
With Shared Print Queue, multiple people can send images to one printer using a Shared Print Queue. With HP Sprocket Studio Plus, you and up to 3 friends can connect directly using Bluetooth to a Shared Queue at the same time! A Host must be connected to the printer to initiate the Shared Queue.
GET FAMILIAR WITH YOUR HP SPROCKET STUDIO PLUS
User Guide and MoreHP Sprocket Studio Support
EASY SETUP
Start printing with your HP Sprocket 200 in just a few simple steps!
Install App
Install the HP Sprocket app to begin setup.
Already have the app? Add a new HP Sprocket through the device menu and get additional help through “Help & How To”
Load Paper
Lift the lid to remove. Load the blue card with the barcode face-down and the photo paper with the logos facing down.
What is the blue card for?
Charge & Power On
To charge, connect the USB cord. Press and hold the power button until the status LED turns white.
Get Connected
Use Bluetooth® to connect to your printer. The HP Sprocket app will help you pair during the in-app setup instructions. If you have already set up your printer, open the Main Menu, tap “sprocket”, then choose “Manage Printers” and tap “Add New Printer”. Choose your printer to connect.
Install App
Install the HP Sprocket app to begin setup.
Load Paper
Lift the lid to remove. Load the blue card with the barcode face-down and the photo paper with the logos facing down.
Already have the app? Add a new HP Sprocket through the device menu and get additional help through “Help & How To”
What is the blue card for?
Learn moreCharge & Power On
To charge, connect the USB cord. Press and hold the power button until the status LED turns white.
Get Connected
Use Bluetooth® to connect to your printer. The HP Sprocket app will help you pair during the in-app setup instructions. If you have already set up your printer, open the Main Menu, tap “sprocket”, then choose “Manage Printers” and tap “Add New Printer”. Choose your printer to connect.
CUSTOMIZE
Customize your photos with the HP Sprocket app.
PRINT AND SHARE
The HP Sprocket Printer lets you capture and share fun-filled moments with vibrant prints. Enjoy all your prints on sticky-backed HP Sprocket Photo Paper.
SHARED PRINT QUEUE
With Shared Print Queue, multiple people can send images to one printer using a Shared Print Queue. With HP Sprocket 200, you and up to 3 friends can connect directly using Bluetooth to a Shared Queue at the same time! A Host must be connected to the printer to initiate the Shared Queue.
Print Quality TipsGET FAMILIAR WITH YOUR HP SPROCKET 200
User Guide and MoreHP Sprocket 200 Support
EASY SETUP
Start printing with your HP Sprocket 3x4 in just a few simple steps!
Install App
Install the HP Sprocket app to begin setup.
Already have the app? Add a new HP Sprocket through the device menu and get additional help through “Help & How To”
Load Paper
Lift the lid to remove. Load the blue card with the barcode face-down and the photo paper with the logos facing down.
What is the blue card for?
Charge & Power On
To charge, connect the USB cord. Press and hold the power button until the status LED turns white.
Get Connected
Use Bluetooth® to connect to your printer. The HP Sprocket app will help you pair during the in-app setup instructions. If you have already set up your printer, open the Main Menu, tap “sprocket”, then choose “Manage Printers” and tap “Add New Printer”. Choose your printer to connect.
Install App
Install the HP Sprocket app to begin setup.
Load Paper
Lift the lid to remove. Load the blue card with the barcode face-down and the photo paper with the logos facing down.
Already have the app? Add a new HP Sprocket through the device menu and get additional help through “Help & How To”
What is the blue card for?
Learn moreCharge & Power On
To charge, connect the USB cord. Press and hold the power button until the status LED turns white.
Get Connected
Use Bluetooth® to connect to your printer. The HP Sprocket app will help you pair during the in-app setup instructions. If you have already set up your printer, open the Main Menu, tap “sprocket”, then choose “Manage Printers” and tap “Add New Printer”. Choose your printer to connect.
CUSTOMIZE
Customize your photos with the HP Sprocket app.
PRINT AND SHARE
The HP Sprocket Printer lets you capture and share fun-filled moments with vibrant prints. Enjoy all your prints on sticky-backed HP Sprocket Photo Paper.
SHARED PRINT QUEUE
With Shared Print Queue, multiple people can send images to one printer using a Shared Print Queue. With HP Sprocket 3x4, you and up to 3 friends can connect directly using Bluetooth to a Shared Queue at the same time! A Host must be connected to the printer to initiate the Shared Queue.
Print Quality TipsGET FAMILIAR WITH YOUR HP SPROCKET 3X4
User Guide and MoreHP Sprocket 3X4 Support
EASY SETUP
Start printing with your HP Sprocket Panorama in just a few simple steps!
Install App and Charge Printer
Install the HP Sprocket Panorama app to begin setup. (a) Charge the
printer with the USB cable before use. (b) Once charged, press
the power button to turn on the printer.
Remove the Cover
Remove the cover (a) and take out the paper roll holder (b).
Insert the Cleaning Sheet
Feed the edge of the cleaning sheet into the slot until it
hits the stopper. Replace the cover until you hear a click.
The cleaning sheet will feed automatically.
What is the blue card for?
Ready Paper Roll
(a) Once the cleaning sheet is out, remove the cover and twist the
cap off the end of the paper roll holder. (b) Place the paper roll onto
the paper roll holder, and twist the cap back on until it clicks.
Load the Paper Roll
Feed the edge of the paper into the slot until it reaches the stopper. Place the paper roll holder back inside and make sure it clicks before closing the cover.
NOTE: Printer will automatically print a calibration barcode sticker.
Cut the Barcode, and Enjoy!
After the printer automatically prints the calibration barcode sticker, press down on the paper cutter to remove it. Open the mobile app and follow instructions to add your printer and it will be ready for use.
Install App and Charge Printer
Install the HP Sprocket Panorama app to begin setup. (a) Charge the
printer with the USB cable before use. (b) Once charged, press
the power button to turn on the printer.
Remove the Cover
Remove the cover (a) and take out the paper roll holder (b).
Insert the Cleaning Sheet
Feed the edge of the cleaning sheet into the slot until it
hits the stopper. Replace the cover until you hear a click.
The cleaning sheet will feed automatically.
Ready Paper Roll
(a) Once the cleaning sheet is out, remove the cover and twist the
cap off the end of the paper roll holder. (b) Place the paper roll onto
the paper roll holder, and twist the cap back on until it clicks.
Load the Paper Roll
Feed the edge of the paper into the slot until it reaches the stopper. Place the paper roll holder back inside and make sure it clicks before closing the cover.
NOTE: Printer will automatically print a calibration barcode sticker.
Cut the Barcode, and Enjoy!
After the printer automatically prints the calibration barcode sticker, press down on the paper cutter to remove it. Open the mobile app and follow instructions to add your printer and it will be ready for use.
CUSTOMIZE
Start printing with your HP Sprocket Panorama App in just a few simple steps!.
PRINT AND SHARE
The HP Sprocket Select printer lets you capture and share fun-filled moments with vibrant prints. Enjoy all your prints on sticky-backed HP Sprocket Photo Paper.
SHARED PRINT QUEUE
With Shared Print Queue, multiple people can send images to one printer using a Shared Print Queue. With HP Sprocket Panorama, you and up to 3 friends can connect directly using Bluetooth to a Shared Queue at the same time! A Host must be connected to the printer to initiate the Shared Queue.
GET FAMILIAR WITH YOUR HP SPROCKET PANORAMA
User Guide and MoreHP Sprocket Panorama Support
EASY SETUP
Start printing with your HP Sprocket Photobooth in just a few simple steps.
Starting Up and Shutting Down
(a) Plug the Photobooth in with the included adapter.
(b) Wait 4 seconds, then press and hold the power button to turn the device on.
(b) Wait 4 seconds, then press and hold the power button to turn the device on.
How to Load Paper
(a) Press down on the groove of the door and slide
the door to open it.
(b) Load paper stack into the front door pocket, ensuring the barcode is facing left and the glossy side is facing right.
NOTE: Insert either 1 full pack (10 sheets + corresponding blue calibration sheet) or 2 full packs (20 sheets + 2 corresponding blue calibration sheets) at a time.
(c) Once the calibration sheet is done processing, the device is ready to use.
NOTE: Insert either 1 full pack (10 sheets + corresponding blue calibration sheet) or 2 full packs (20 sheets + 2 corresponding blue calibration sheets) at a time.
(c) Once the calibration sheet is done processing, the device is ready to use.
Connect to Wi-Fi
Click on the Wi-Fi icon in the upper right corner of the home screen or select “Settings,” then network. Slide the bar next to “Enable Wi-Fi” into the on position, then select your network and click “Connect.”
Setting Up Your Photobooth
Follow the on-screen instructions to set up your device.
Starting Up and Shutting Down
(a) Plug the Photobooth in with the included adapter.
(b) Wait 4 seconds, then press and hold the power button to turn the device on.
(b) Wait 4 seconds, then press and hold the power button to turn the device on.
How to Load Paper
(a) Press down on the groove of the door
and slide the door to open it.
(b) Load paper stack into the front door pocket, ensuring the
barcode is facing left and the glossy side is facing right.
NOTE: Insert either 1 full pack (10 sheets + corresponding blue calibration sheet) or 2 full packs (20 sheets + 2 corresponding blue calibration sheets) at a time.
(c) Once the calibration sheet is done processing, the device is ready to use.
and slide the door to open it.
(b) Load paper stack into the front door pocket, ensuring the
barcode is facing left and the glossy side is facing right.
NOTE: Insert either 1 full pack (10 sheets + corresponding blue calibration sheet) or 2 full packs (20 sheets + 2 corresponding blue calibration sheets) at a time.
(c) Once the calibration sheet is done processing, the device is ready to use.
Connect to Wi-Fi
Click on the Wi-Fi icon in the upper right corner of the home screen or select “Settings,” then network. Slide the bar next to “Enable Wi-Fi” into the on position, then select your network and click “Connect.”
Setting Up Your Photobooth
Follow the on-screen instructions to set up your device.
Set Up Your Event
Start taking photos with your HP Sprocket Photobooth.
FUN FOR ANY EVENT
Elevate your upcoming occasion to new heights with the HP Sprocket Photobooth! This one-of-a-kind photobooth device lets you instantly take and share fun, customized photos on 3x4” sticky-backed photo paper.
Wi-Fi Enabled for Digital Sharing
With digital sharing, it’s easy to share your favorite photobooth memories with your friends! Just scan the QR code that appears after taking your photo or upload an entire session from the gallery and enjoy instant digital prints. Wi-Fi connection required.
GET FAMILIAR WITH YOUR HP SPROCKET PHOTOBOOTH
User Guide and MoreHP SPROCKETアプリを発見する
DISCOVER THE HP SPROCKET PANORAMA APP
アプリの楽しい機能の使い方を確認する
プレビュー表示イメージ
画像プレビューから写真を編集、印刷、または共有します。
• 鉛筆アイコンをタップして画像を編集します。フィルターを適用し、フレーム、ステッカー、テキスト、その他の追加機能を追加します。
• 写真をズーム、回転、またはサイズ変更するには、2 本の指でピンチします。
• プリンタアイコンをタップして印刷します。
また、写真の複数のコピーを共有、保存、印刷することもできます。これに加えて、あなたはそれについてもっと知る必要があります。
Photobooth
- Open the sprocket app camera and swipe to “Photobooth”.
-
Tap the shutter icon to start taking four photos in a row. Watch the on-screen countdown to know when to pose.
- • Your four images will appear tiled on the same print in the Preview Screen.
- • Press the shutter icon to stop a photo series while the pictures are being taken.
Custom Stickers
- In Edit, open the Sticker Gallery.
- In the bottom-left corner, tap the plus icon.
-
Fill the frame with your doodle and tap the screen.
- • Custom stickers will save to the Custom Sticker Gallery folder, located next to the plus icon in the Sticker Gallery.
- • Long-tap on a sticker to delete it.
- • Long-tap on the Custom Sticker Gallery to delete the folder.
Tile Printing
- From the Preview Screen, tap “Tiles”.
- Select your pattern. Tiled photos can print out in 2 x 2 or 3 x 3 prints.
- Assemble your prints to create a large tiled photo!
Photo ID
Works best with Sprocket Studio.
- Open the sprocket camera and swipe to “Photo ID”.
- Follow the prompts for selecting a background, removing accessories, and centering your face or your friend’s face.
- Choose photo dimensions.
Note: We don’t guarantee that the sprocket photo will be accepted by all entities that require an official photo. You will need to confirm that the photo meets the applicable requirements.
Custom Paper Length
• Choose the perfect paper length for your print, anywhere between 0.5 to 9 inches.
• Pinch with two fingers to zoom, rotate or resize the photo.
• Toggle between portrait and landscape orientation.
• Tap “Next” to edit your image. Add frames, stickers, text, and other extras before printing.
You can also share, save, and print multiple copies of your photo.
Bluetooth® is a trademark owned by its proprietor and used by HP under license.
The ZINK® Technology and ZINK® Trademarks are owned by ZINK Holdings LLC. Used under license.
Use the Sprocket Studio Power Bank
1. Charge the portable power bank using the power cord included with your printer.
2. When charged, unwrap the nested cord on the power bank and plug it into the printer.
MAKE SURE TO USE THE CLEANING SHEET!
Load the blue-colored cleaning sheet before loading any paper or if streaks appear on your prints.
MAKE SURE TO USE THE CLEANING SHEET!
Load the blue-colored cleaning sheet before loading any paper or if streaks appear on your prints.
MAKE SURE TO USE THE CLEANING SHEET!
Load the blue-colored cleaning sheet before loading any paper or if streaks appear on your prints.
HP Sprocket
- プライバシー|
- 利用規約|
- エンドユーザーライセンス契約
- Cancer and Reproductive Harm - www.P65Warnings.ca.gov
© Copyright 2024 C&A Marketing, Inc. is the manufacturer of the HP® Sprocket®, under license from HP, Inc. HP and Sprocket trademarks are owned by HP Inc. or its affiliates. ZINK® Technology and ZINK® Trademarks are owned by ZINK Holdings LLC., used under license.
