链轮充电问题

I18n Error: Missing interpolation value "x" for "发布者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

你好... 我有一个全新的链轮充满电了 2 个多小时,我的平板电脑显示链轮已充满电... 在红灯亮起之前我只有 3 张打印出来表示它需要再次充电??我重置了链轮然后又给它充电... 在需要充电之前还能得到几张打印... 这正常吗?在需要充电之前应该打印多少张?非常感谢 x


较早的帖子 较新的帖子

I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| 评论"

  • @kittylamb
     You should be able to print 15 to 20 photos. Try to recharge the battery overnight and try printing. The charge should last for almost 4 hours.
    If issue persists, I suggest calling our phone support regarding warranty and service options.   

    1) Click on this link – www.hp.com/contacthp/
    2) Select the product type.
    3) Enter the serial number of your device or select let HP detect your product option.
    4) Select the country from the drop-down.
    5) You should see the HP phone support number or Chat option listed. 
     
    If you would like to thank us for our efforts to help you, feel free to give us a virtual high-five by clicking the ‘Thumbs Up’ icon below, 
    followed by clicking on the “Accept as solution” button.
    Have a great day!

    Roopa-S I am an HP Employee
    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
  • hi theremany thanks for your reoly….could you tell me roughly how many prints i could expect to get from one charge? many thanks helen

    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
  • @kittylamb
    Welcome to HP Forums, 
    This is a great place to get support, find answers and tips. Thank you for posting your query. I’ll be more than glad to help you out 🙂 
    The Sprocket battery should last longer than 3 prints. To fix this issue, please try the steps below:
     
    Solution 1: Update the printer Firmware:
    On your mobile device, open the HP sprocket app and make sure the printer firmware is up-to-date.
     
    Solution 2: To maximize the battery life of your Sprocket printer, try the steps below:
    There are several ways to make sure your battery lasts as long as possible. Use these recommendations to maximize battery life.

    Change how long the printer remains on: By default, the printer is set to turn off after 5 minutes. To change when the printer automatically turns off, open the HP sprocket app on your mobile device, and then tap the Menu icon  . Tap sprocket, and then tap Printer Settings. Tap Auto Off, and then select when you want the printer to turn off.

    Charge the printer when you are not using it: Leave the printer plugged into a power source whenever you are not using it.
    NOTE: You can use the printer while it is charging.

    Charge the printer for more than 90 minutes. HP recommends you charge the printer up to 90 minutes or until the power light turns green. However, you can charge the printer for longer than 90 minutes, which might increase battery life.

    Use an external battery charger. Using an external battery charger allows you to charge the printer when the battery is low and you cannot access another power source. To purchase an external battery charger, go to HP Home & Home Office. You can also purchase external battery chargers from other retailers.

    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

    Roopa-S I am an HP Employee
    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

发表评论

请注意,评论必须经过批准才能发布