Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
Sprocket 无法启动
I18n Error: Missing interpolation value "x" for "发布者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
我似乎遇到了同样的问题，只是我的手机是三星Galaxy S8。
我已经把它插上充电了，它只是闪烁红色。我让它充电一个小时拔掉它的电源，当我按下按钮时什么也没做。
有什么帮助吗？
I am having the same exact issue. No way to even turn the printer on to “turn it on”! I’ve contacted HP via email on multiple occasions and still have not received a response.
@MrsLorinf
TEJ1602 I am an HP EmployeeThis looks like a hardware issue.
Please reach out to the HP Support in your region regarding the service options for your printer.
Hope this helps!
Please click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
I’ve tried all the above but still will not work? Its not hot so it isn’t the case of letting it cool down? I plug it in to charge and it flashes red, is this normal?
@MrsLorinf, Welcome to HP Support Community!
Follow the steps below and see if that resolves the issue.
Step 1: Let the printer cool
The battery might not charge if it is too warm, above 40º C (104º F). Disconnect the printer and let it cool down before you charge it or use it again.
Turn off the printer, and then disconnect the USB cable.
Let the printer cool for at least 15 minutes.
Turn on the printer.
If the printer turns on, you do not need to continue troubleshooting. To avoid overheating the battery in the future, let the printer cool down between print jobs and keep it in a cool, dry environment when you are not using it.
If the printer does not turn on, continue to the next step.
Step 2: Charge the printer
The battery might not have enough power to turn on. Charge the printer for at least 30 minutes, disconnect it, and then turn on the printer.
Connect the USB cable to the printer, and then connect the other end to a power source with at least 2 AMPs, such as a wall adapter or USB-capable power strip.
Charge the printer for at least 30 minutes or until the Charging Indicator light turns green.
Disconnect the USB cable from the printer.
Turn on the printer.
If the printer turns on, you do not need to continue troubleshooting. To avoid overheating the battery in the future, let the printer cool down between print jobs and keep it in a cool, dry environment when you are not using it.
If the printer does not turn on, continue to the next step.
Step 3: Reset the printer
If the printer does not turn on when you press the Power button, reset the printer to clear any errors.
Remove the paper cover.
Locate the Reset button.
With a paperclip or pin, press and hold the Reset button for 3 seconds.
The printer resets.
Replace the paper cover, and then turn on the printer.
If the printer turns on, you do not need to continue troubleshooting. To avoid overheating the battery in the future, let the printer cool between print jobs and keep it in a cool, dry environment when you are not using it.
Hope this helps! Keep me posted.
TEJ1602 I am an HP EmployeePlease click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!