Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
链轮印刷质量
I18n Error: Missing interpolation value "x" for "发布者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
你好呀。我的链轮把所有的脚趾都变成了粉红色。我想这不正常。我不抱怨打印质量，只是这个“小”问题！
@Tafy79
This could be a hardware issue.
I request you to talk to HP support.
They might have multiple options to help you with this.
Click on this link - https://support.hp.com/us-en/contact-hp?openCLC=true
Select the country.
Enter the serial of your device.
Select the country from the drop-down.
Click on “Show Options”.
Fill the web-form. A case number and phone number will now populate for you.
Cheers.
Sandytechy20 I am an HP EmployeeThank you for your help. I already followed all the steps the tecnical support suggests before posting my problem, none of them worked 😔
@Tafy79
Welcome to HP support community.
Upgrade the Sprocket firmware
Make sure the Sprocket is on and your mobile device is connected to the Internet.
On your mobile device, open the HP sprocket app.
Tap the Menu icon , and then tap sprocket.
Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.
Under the Status section, locate Battery.
If the battery charge is 25% or higher, continue with these steps.
If the battery charge is 24% or lower, charge the battery for at least 30 minutes, and then continue with these steps.
In Printer Settings, look for a firmware upgrade.
If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.
If a firmware upgrade option does not display, the firmware is up-to-date.
You can refer this HP document for more assistance:- Click here
Sandytechy20 I am an HP EmployeeLet me know how it goes.
To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.
Cheers.