Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
Sprocket Plus 不打印。卷纸但卡纸
I18n Error: Missing interpolation value "x" for "发布者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
今年夏天买了打印机，之前已经打印了两次，而且工作没有问题。从那以后它一直放在抽屉里，当尝试打印到它时根本行不通。
它会吐出蓝卡，然后在一两秒钟后打印出一张完全空白的照片。
红色闪烁。
你的 **bleep**ing 固件毁了我的第一代链轮，我本来打算买纸张，但现在所有照片都有白线，我能够在设备内 12 个月前的纸张上毫无问题地打印，但是更新后所有纸张都被浪费掉了。
我没想到这件商品能永远存活，但不到 6 个月是不可接受的。必须有某种方法来解决这个问题。
@Almia After sending a print job to your Sprocket, the print job does not print. Make sure the Sprocket is charged, connected to your mobile device over a Bluetooth connection, and the Sprocket firmware is up-to-date.
Step 1: Turn on the Sprocket and check battery status
The Sprocket might have turned off or the battery might need to be charged. Use the HP sprocket app to check the battery status, and then adjust the Auto Off setting.
Press and hold the Power button to turn on the Sprocket, and then open the HP sprocket app.
Tap the Menu icon , and then tap sprocket.
Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.
Under the Status section, locate Battery.
If the battery charge is 25% or higher, continue with these steps.
If the battery charge is 24% or lower, charge the battery for 30 minutes, and then continue with these steps.
Tap Auto Off to change when the Sprocket turns off, if necessary.
If the issue persists, continue to the next step.
Riddle_Decipher I am an HP EmployeeFOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 2 ONWARD
(By the end of this article all the issues should be resolved)
P.S: Welcome to HP Community 😉
Let me know how that pans out,
If you feel I was helpful, simply click on Accept as Solution to help the community grow,
That said, I will have someone follow-up on this to ensure you’ve been helped,
Just in case you don’t get back to us,
have a good day, ahead.