Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
Sprocket 200 不负责
I18n Error: Missing interpolation value "x" for "发布者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
嗨，我女儿的 Sprocket 200 不会负责，因此无法打开以重置或尝试更新。一根充电线已连接，充电指示灯会显示红色约 10 秒，然后熄灭。尝试了重置按钮并按住电源按钮但没什么好玩的。
看过联系支持人员，但不幸的是购买了 Chrostmas 2018，所以已经过了保修期，所以那里有 16 个月没什么好玩的，尽管几乎没用过有点令人失望。
@BRUCE225
We are happy to hear that you have resolved the issue.
In the future, if you have any other concerns. Please get back to us. We will assist you.
Have a nice day!!
Hi after constantly trying to charge and follow the tips above it I unplugged it and gave it up has a bad job after about two days it burst back into life.So touch wood everything ok told my daughter to remember to keep topping up charge think she had completely depleted battery.Thank you.
@BRUCE225 Welcome to HP Community!
I understand that the Sprocket 200 won’t take charge.
Please perform the below steps and check.
Step 1: Let the printer cool
The battery might not charge if it is too warm, above 40º C (104º F). Disconnect the printer and let it cool down before you charge it or use it again.
Turn off the printer, and then disconnect the USB cable.
Let the printer cool for at least 15 minutes.
Turn on the printer.
If the printer turns on, you do not need to continue troubleshooting. To avoid overheating the battery in the future, let the printer cool down between print jobs and keep it in a cool, dry environment when you are not using it.
If the printer does not turn on, continue to the next step.
Step 2: Charge the printer
The battery might not have enough power to turn on. Charge the printer for at least 30 minutes, disconnect it, and then turn on the printer.
Connect the USB cable to the printer, and then connect the other end to a power source with at least 2 AMPs, such as a wall adapter or USB-capable power strip.
Charge the printer for at least 30 minutes or until the Charging Indicator light turns green.
Disconnect the USB cable from the printer.
Turn on the printer.
If the printer turns on, you do not need to continue troubleshooting. To avoid overheating the battery in the future, let the printer cool down between print jobs and keep it in a cool, dry environment when you are not using it.
If the printer does not turn on, continue to the next step.
Step 3: Reset the printer
If the printer does not turn on when you press the Power button, reset the printer to clear any errors.
Remove the paper cover.
Locate the Reset button.
With a paperclip or pin, press and hold the Reset button for 3 seconds.
The printer resets.
Replace the paper cover, and then turn on the printer.
If the printer turns on, you do not need to continue troubleshooting. To avoid overheating the battery in the future, let the printer cool between print jobs and keep it in a cool, dry environment when you are not using it.
Keep us posted,
If you would like to thank us for our efforts to help you,
Give us a virtual high-five by clicking the ‘Thumbs Up’ icon below, followed by clicking on the “Accept as solution” on this post,
Have a great day!