Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
我的 Sorocket 打印机不打印。
I18n Error: Missing interpolation value "x" for "发布者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
我已将蓝牙连接到 Sprocket 打印机，但系统显示需要更新。我允许它更新，然后去打印我的照片，但它没有打印。然后它收到一条错误消息，说它需要纸张，但是里面已经有纸了。我放了一个新包，它还在继续说同样的信息。它发出声音好像在打印，但事实并非如此。就在它打印之前，灯会闪烁，然后在红灯出现之后。我该怎么做？
@lgyrych
Thank you for being a part of HP Forums. This is a great place to get support, find answers and tips to your technical queries.
Removing the photo papers, checking and clearing any stuck photo paper from the paper tray may resolve the issue. Let’s try these steps:
1.) On the HP sprocket app, tap OK to clear the error message.
2.) Turn off the printer.
3.) Remove the paper cover by sliding it away from the output slot, and then set it aside.
Figure : Removing the paper cover
Slide the paper cover
Remove the paper cover
4.) Remove the stack of photo paper from the input tray.
5.) Inspect the input tray for stuck photo paper.
If there is stuck photo paper, use your fingernail to pry it loose, and then discard it.
If there is no stuck photo paper, remove a single sheet of photo paper from the bottom of the stack, and then discard it.
6.) Reload the photo paper with the HP logos facing down.
Figure : Reloading the photo paper
7.) Align the paper cover with the tracks on the outside of the printer, and then slide the paper cover toward the output slot until it is firmly seated.
8.) Turn on the printer.
9.) Resend the print job.
If the issue persists, repeat the steps in this document until you are able to print.
Let me know how it goes!
If the information I’ve provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that’ll help us and others see that we’ve got the answers!
Have a great day!
Senan6806 I am an HP Employee