Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
没有卡纸时出现卡纸消息。然后Ox6100004a
I18n Error: Missing interpolation value "x" for "发布者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
正在尝试复制文档，但收到没有纸张的消息。已重新定位纸张，并收到卡纸消息。已检查不存在的卡纸，然后重试。要关闭打印机的消息，请稍候，再打开它。重复上面没有纸质消息等。最后留言 “ox6100004A 打印机或墨水系统有问题。先关闭打印机，然后再开启。如果您继续收到此消息，请联系 HP。”
最近没有软件或驱动程序更改。我的互联网连接是无线的。
已尝试从我的电脑打印。消息 “正在打印-过滤器失败” 打印机未打印。我的操作系统是 Mac OS 莫哈韦沙漠版本 10.14.2
I got the same problem and no solution for now. I want to add more info on this issue.
We got HP InkTank 415 in the office. It is conected by USB cable to the recption computer, and by wifi on other two laptops.
The problem only occur in the wifi connected computers. Never in the cable conected one.
If you try to print from the laptop, the jam message apear on screen, but not in the printer.
You can print from desktop computer easy, and there is not problem.
When I get this error from laptop, I run windows printer problem solver, no proble is found, but printer start to print all jobs as normal.
@PatD3
Thank you for joining the HP Support Community
I suggest you do a Hard Reset
(1) Turn the printer on, if it is not already on.
(2) Wait until the printer is idle and silent before you continue.
(3) With the printer turned on, disconnect the power cord from the rear of the printer.
(4) Unplug the power cord from the wall outlet.
(5) Wait at least 60 seconds.
(6) Plug the power cord back into the wall outlet.
NOTE: HP recommends connecting the printer power cord directly to the wall outlet.
(7) Reconnect the power cord to the rear of the printer.
(8) Turn on the printer, if it does not automatically turn on.
The printer might go through a warm-up period. The printer lights might flash, and the carriage might move.
Wait until the warm-up period finishes and your printer is idle and silent before you proceed.
Then follow the below steps that could resolve the issue.
Step 1: Remove and then reinstall the cartridges
Follow these steps to remove and then reinstall the cartridges.
Press the Power button to turn on the printer, if it is not already on.
Place your fingers into the slot on the left side of the printer, and then gently lift up to open the cartridge access door. The carriage moves to the cartridge access area. Wait several seconds until the carriage is idle and silent before you continue.
Figure : Place your fingers in the slot on the left side of the printer
Press the tab inward on the front of the old cartridge to release it, and then pull up on the cartridge to remove it from the slot.
Figure : Remove the cartridge from its slot
Turn the cartridge so that the cartridge contacts face downward, and then match the label color with the color dot on the carriage.
Slide the cartridge into its slot, and then gently press the cartridge down until it clicks into place.
Figure : Install the cartridge
Repeat these steps to remove and reinsert the other cartridges.
Close the cartridge access door. The printer automatically aligns the cartridges.
Figure : Close the cartridge access door
Step 2: Update the firmware for the printer using this link: https://support.hp.com/us-en/product/hp-officejet-pro-6830-e-all-in-one-printer-series/5390307/docum…
Restart the printer.
Step 3: Print a Printer Status Report
Print a Printer Status Report to make sure that the hardware functions correctly.
How to print a Printer Status Report
Follow these steps to print a Printer Status Report.
Load plain white paper into the tray.
On the printer control panel, swipe the display to scroll to Setup, and then touch the Setup icon (). The Setup menu displays.
Swipe the display to scroll to Reports, and then touch Reports.
Touch Printer Status Report. The printer prints the report.
Keep me posted, how it goes!
Raj1788I am an HP EmployeeIf the information I’ve provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that’ll help us and others see that we’ve got the answers!
Have a great day!
Cheers:)