hp sprocket 配对后无法连接手机

I18n Error: Missing interpolation value "x" for "发布者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

建议的步骤并未解决看似已安装的固件和应用程序的问题。手机连接打印机。但是,HP Sprocket 应用程序无法首先连接以下载新固件,然后检测到打印机的连接并启用从第一次尝试升级。我尝试了所有建议的故障排除步骤,但都没有奏效。惠普论坛的所有建议都是相同的,只是顺序不同(配对设备、卸载应用程序、重新安装应用程序、重新连接设备)。能够通过重试安装几次来升级固件,直到它通过。


较早的帖子 较新的帖子

I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| 评论"

  • What you posted is what I mentioned I did following all the postings and troubleshooting provided. I was succesful in updating the FW by persistenly retrying until it went through. The suggested fix of App uninstall, device connection removal, etc. might be needed but end user has to give it a few tries until it works.

    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
  • Hello @pedroih -  Can you try completely closing the Sprocket app (double click home button, then swipe up on Sprocket app to close), then reopen the app and see if you’re able to connect? Ideally you can make sure you have the latest firmware version (Menu → sprocket → Printers → Firmware Version), which should be 1.1.5. If the app isn’t showing a connection to the device, I’d once again suggest completely closely the app and restarting it. Thanks,-Brandon

    *I am an HP employee*The comments above represent myself and do not reflect the opinions of HP.If my post solved your issue, please click “Accepted Solution” on the post . To show appreciation for my help, please click the “Thumbs Up Icon” below! Thank you 🙂

    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
  • Hi @pedroih,
     
    Thanks for engaging in HP support Forums! This is a wonderful location to converse with the community, get assistance and find tips! I understand you are having issues with the HP Sprocket won’t connect to the phone. Don’t worry I’ll do my best to help you with this.
     
    At the outset, you’ve diagnosed the issue perfectly before posting the query on HP forums. Excellent job on that score. Kudos to you for that.
     
    It is always a privilege to work with technically savvy customers. I take it as a privilege to share this platform with you. We value your relationship with HP and wish to serve you better.
     
    Let’s start off by performing a reset on the printer: 
     
    Reset the printer again.

    Locate the reset button near the charging port.
    Figure : Locating the reset button

    Gently insert a straight pin into the reset button access point, and then press the reset button for 3 seconds.
    The printer resets and turns off.

    Press and hold the power button until the Status Indicator light is solid and white.
    The printer is now ready to print.

    Charge your sprocket battery to at least 50%
    Power off your sprocket printer
    In the iPhone Bluetooth menu (Settings → Bluetooth), tap the ‘i’ button next to the “sprocket” device, then tap “Forget This Device”
    Restart your iPhone by pressing/holding the power button for 3 seconds, then sliding to power off.
    Power on your sprocket printer
    Discover and pair your sprocket printer by tapping on the “sprocket” device when it appears in the iPhone Bluetooth menu (Settings → Bluetooth).
    Open the sprocket mobile app, where you’ll be automatically prompted for the firmware upgrade.
    Once done, try to check if it’s resolved.

    Alternatively, you can go through this link: Click here
     
    Let me know if those steps worked for you.
    If they did, that’s awesome!
    Give us some reinforcement by clicking the solution and kudos buttons,
    That’ll help us and others see that we’ve got the answers!
    Good Luck.
     

    Jeet_Singh I am an HP Employee
    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

发表评论

请注意,评论必须经过批准才能发布