Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
错误“缺纸”
I18n Error: Missing interpolation value "x" for "发布者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
前几天我的 Sprocket 在工作罚款和打印出图片。
就在今天：每当我按下打印按钮时..它将它发送到设备，我听到它正在打印。
但是接下来它说：“out of 纸”，但这是错误的，因为我用新的 zink 照片纸装入了它。
我说得对，底部是蓝纸... 所以我不知道为什么我现在会遇到麻烦。
@irockfresh,
Jeet_Singh I am an HP EmployeeThank you for the update,
I appreciate your time and efforts,
I’m glad I could contribute towards resolving the issue and finding the solution you were looking for.
Thanks for taking the time to let the community know about the solution.
You’ve been great to work with and it has been a genuine pleasure interacting with you.
I hope both you and your product works great and remain healthy for a long time 😉
Take care now and do have a fabulous week ahead. 🙂
Regards,
Thank you so much. It’s working now.
@irockfresh,
Welcome to HP Support Forums!
I understand you are in need of support,
I’ll be glad to help you out, however, for an accurate solution I will need more details:
Can you try to take out the paper and then put it back? Do you still see the error?
If the paper has been in the printer for some time it may curl due to humidity. I would suggest the following: remove the paper from the printer and lay it on a flat surface. If the paper does not lie flat take note of which way the paper is curled and gently roll the paper in the opposite direction until it will lay flat. Load the paper back in the printer and try again.
Reset the printer:
Turn on the printer.
Locate the reset button near the charging port.
Figure : Locating the reset button
Gently insert the straight pin into the reset button access point, and then press the reset button for 3 seconds.
The printer resets and turns off.
Turn on the printer.
Upgrade the firmware:
Upgrade the printer firmware using the HP sprocket app. HP regularly releases printer updates.
Make sure the printer is charged 50% or more.
Make sure the printer is on and your mobile device is connected to the Internet.
On your mobile device, open the HP sprocket app.
Tap the Menu icon , and then tap sprocket.
Tap Printers, and then tap your printer in the list.
The printer information screen displays.
Look for a firmware upgrade.
If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.
If a firmware upgrade option does not display, the printer firmware is up-to-date.
Let me know how that pans out. 🙂
Jeet_Singh I am an HP EmployeeI hope you have a good day ahead,
And Feel free to ask any other queries as well,
Considering, this forum has some of the best people in the world available and ready to help.;)