Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
正在充电
I18n Error: Missing interpolation value "x" for "发布者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
嗨。
我已经有几个月没用链轮了。当我今天将链轮 200 插入充电时，我不知道它是否在充电，因为充电指示灯一直闪烁红色，LED 闪烁蓝色。当我尝试打开时，它已经充电了一个多小时，它没有响应。
我想知道我的打印机出了什么问题。我希望任何人都能帮助我。谢谢！
Im having trouble to contact HP support. My location is philippines. Can you help me to contact HP support here in Manila, Philippines. Thank you.
As this is a hardware issue, I’d suggest you Contact HP in your region regarding the service options for your computer.
If you are having trouble navigating through the above options, it’s most likely because the device is out of warranty. If yes? please send me a private message with the region you are contacting us from. Check next to your profile Name, you should see a little blue envelope, please click on it.
I tried and follow the steps but there’s no changes at all. I did every troubleshoots that you gave..but still it isnt functioning.😢
Hi @cmllmxm
Welcome to the HP Support Community.
Try the below suggestions to resolve the issue -
Step 1: Let the printer cool
The battery might not charge if it is too warm, above 40º C (104º F). Disconnect the printer and let it cool down before you charge it or use it again.
Turn off the printer, and then disconnect the USB cable.
Let the printer cool for at least 15 minutes.
Turn on the printer.
If the printer turns on, you do not need to continue troubleshooting. To avoid overheating the battery in the future, let the printer cool down between print jobs and keep it in a cool, dry environment when you are not using it.
If the printer does not turn on, continue to the next step.
Step 2: Charge the printer
The battery might not have enough power to turn on. Charge the printer for at least 30 minutes, disconnect it, and then turn on the printer.
Connect the USB cable to the printer, and then connect the other end to a power source with at least 2 AMPs, such as a wall adapter or USB-capable power strip.
Charge the printer for at least 30 minutes or until the Charging Indicator light turns green.
Disconnect the USB cable from the printer.
Turn on the printer.
If the printer turns on, you do not need to continue troubleshooting. To avoid overheating the battery in the future, let the printer cool down between print jobs and keep it in a cool, dry environment when you are not using it.
If the printer does not turn on, continue to the next step.
Step 3: Reset the printer
If the printer does not turn on when you press the Power button, reset the printer to clear any errors.
Remove the paper cover.
Locate the Reset button.
With a paperclip or pin, press and hold the Reset button for 3 seconds.
The printer resets.
Replace the paper cover, and then turn on the printer.
If the printer turns on, you do not need to continue troubleshooting. To avoid overheating the battery in the future, let the printer cool between print jobs and keep it in a cool, dry environment when you are not using it.
Hope this helps! Keep me posted.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping