Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
Sprocket 200'üm neden açılmıyor?
thephotoprinter tarafından tarihinde yayınlandı
HP Sprocket 200'ümü bir süre önce aldım ve kullanma şansım olmadı. Yazıcıyı yeniden başlatma ve gece boyunca şarj etme adımlarını takip ettim ancak hala kırmızı renkte yanıp sönüyor. Açılmıyor veya Bluetooth'a bağlanmıyor.
Biri yardım edebilir mi?
← Daha eski gönderi Daha Yeni Gönderi →
@thephotoprinter
Welcome to HP support community.
Turn off the Sprocket, and then remove the paper cover.
Remove any loose photo paper from the input tray, and then make sure the photo paper is in good condition. Remove any severely bent, wrinkled, or torn photo paper from the stack.
CAUTION:
Do not try to remove any jammed paper from inside the paper path. This can damage the paper path rollers.
Turn on the Sprocket.
If there is jammed photo paper, the Sprocket feeds it through the output slot.
Wait until the Sprocket is idle and silent, and then remove any photo paper fed through the output slot.
Reload the photo paper with the HP logos facing down. Make sure to load genuine Sprocket photo paper, or the Sprocket might not print.
Replace the paper cover, and then resend the print job.
You can refer this HP document for more assistance:-Click here
Sandytechy20 I am an HP EmployeeLet me know how it goes.
To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.
Cheers.