Merhaba! Sprocket yazıcım prize takılı ve kullandığım gibi şarj oluyor. Telefonumdan bir fotoğraf yazdırmaya çalıştığımda, zincir dişlisi yazdırmayı yarı yolda durduruyor ve kapanıyor. Fotoğrafın yarısını kesmeden zincir dişlisini baskıya devam ettirmenin bir yolunu bulamadım. Lütfen yardım et.
Sprocket yazdırmayı durduruyor
marley17oc tarafından tarihinde yayınlandı
← Daha eski gönderi Daha Yeni Gönderi →
@marley17oc, Welcome to HP Support Community!
Follow the steps below to resolve the issue-
Upgrade the Sprocket firmware
HP regularly releases firmware updates. Upgrading the firmware might resolve the issue.
Make sure the Sprocket is on and your mobile device is connected to the Internet.
On your mobile device, open the HP sprocket app.
Tap the Menu icon , and then tap sprocket.
Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.
Under the Status section, locate Battery.
If the battery charge is 25% or higher, continue with these steps.
If the battery charge is 24% or lower, charge the battery for at least 30 minutes, and then continue with these steps.
In Printer Settings, look for a firmware upgrade.
If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.
If a firmware upgrade option does not display, the firmware is up-to-date.
Send a print job.
If the issue persists, Reset your mobile device and Sprocket
Turn off your mobile device, and then turn it back on.
Turn on the Sprocket.
Remove the Paper Cover, and then use a narrow object, such as a pen or paperclip, to press and hold the Reset button for 3 seconds until the Sprocket turns off.
The location of the Reset button varies by Sprocket model. Typically, the button is located underneath the Paper Cover, but can also be found on the outside next to the charging port.
Example of resetting the HP Sprocket Select Photo Printer
Turn on the Sprocket.
Hope this helps! Keep me posted.TEJ1602 I am an HP Employee
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!