Sprocket yazıcı yazdıramıyor, beyaz ışık yanıp sönmeye devam ediyor

Wai2go tarafından tarihinde yayınlandı

Arka LED: Rosso: carica bassa, Rosso lampeggiante: in carica, Verde: carica completa, Ambra: carica media; LED di stato anteriore: yükseltici: rosso-nessuna carta / inceppamento carta / coperchio aperto, imppostazione ön tanım: bianco-accensione / inattività Al primo utilizzo aprendo l'app e impostando le tercih edilen, l'utentere pue kişisel: 6 kişisel renkler spegnimento / sospensione / boşta / baskı / altro errore

Daha eski gönderi Daha Yeni Gönderi

3 yorum

  • As this is a hardware issue, I’d suggest you Contact HP in your region regarding the service options for your printer.
    If you are having trouble navigating through the above options, it’s most likely because the device is out of warranty. If yes? please send me a private message with the region you are contacting us from. Check next to your profile name, you should see a little blue envelope, please click on it.  
    Have a great day! 
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

    üzerinde Jay_G24
  • Hi, I have tried all these as well as the steps found in the online trouble shooting guide and it doesn’t seem to work. Are there any known issues with this specific model?

    üzerinde Wai2go
  •  Hi @Wai2go
    Welcome to the HP Support Community. I’d be happy to assist you with the  "White light blinking"issue. 
     Try the steps below-
    *Restart your phone
    *Make sure the Sprocket has photo paper in the input tray
    Check the input tray and make sure photo paper is loaded.

    Turn off the Sprocket, and then remove the paper cover.

    Make sure to load Sprocket Photo Paper, up to 10 sheets, with the HP logos facing down.

    Replace the paper cover, and then turn on the Sprocket.

    If the issue persists, continue to the next step.
    *Confirm mobile device settings
    Make sure your mobile device settings allow a connection with your Sprocket.

    Turn on the Sprocket.

    On your mobile device, open the Bluetooth settings menu, and then make sure Bluetooth is enabled.

    Check the settings on your Android or iOS device.

    Android devices: On your mobile device, open the Location or Location Services menu, and then make sure the setting is turned on.
    You can turn location permission on to connect and print, and then turn it off when you are not using the Sprocket.

    iOS devices: Previously paired Bluetooth accessories such as Apple AirPods might interfere with the initial discovery of the Sprocket. Unpair the accessory from the Bluetooth menu of your device before initial pairing with your Sprocket. The accessory can then be paired again after the Sprocket is connected.

    On your mobile device, open the HP sprocket app.

    Tap the Menu icon , tap sprocket, and then tap Manage Printers.
    A list of available Sprockets displays.

    If your Sprocket displays: The Sprocket is connected.

    If your Sprocket does not display: Tap Add New Printer, and then tap the name of your Sprocket.

    Hope this helps! Keep me posted. 
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
    Have a great day! 

    üzerinde Jay_G24

yorum Yap

Lütfen unutmayın, yorumlar yayınlanmadan önce onaylanmalıdır.