Yazıcı Kurulumu

Enya1 tarafından tarihinde yayınlandı

Zincir dişlimi bağlamak ve kurmak için mücadele ediyorum. Yazıcıyı her kullandığımda bununla ilgili sorunlar yaşıyorum. Geçmişte bir şekilde sorunun üstesinden gelmeyi başardım ama çözmek için ne yaptığımı öğrenmeden. Şimdi deniyorum ama başaramıyorum. Yazıcıyı bağlayıp yapılandırmayı başardım ve ardından kurulumun başarısız olduğunu söyleyen bir mesaj alıyorum, bunun neden veya ne yapacağımdan emin değilim, herhangi biri yardımcı olabilir mi? Ayrıca yalnızca yazıcı şarjdayken yazdırabiliyorum ve yazıcıyı aldığım günden beri bu sorunla karşılaşıyorum. Herhangi bir yardım çok takdir edilir çünkü öğe şimdi sinirlerimi bozuyor! Şimdiden teşekkürler

← Daha eski gönderi Daha Yeni Gönderi →

2 yorum

  • Printers are the most used machines in many organizations and institutes. Technical glitches of the printer setup can be fatal if you do not resolve them on time. In case your printer setup is under warranty then we suggest you replace it with the company. If the warranty period of your printer is over, then taking technical help from a third party might help you.
    https://allprinter-setup.com/

    üzerinde Printer Setup

  • @Enya1 Here’s a step by step guide on setting up the HP Sprocket 200 Photo printer:
     
    Step 1: Unbox and charge the printer
    Unbox the printer, and then charge it before using it.

    Remove the printer from the box, and then remove any packing material and tape from the printer.

    Connect the USB cable to the printer and a USB power supply.

    Charge the printer for 30 minutes or until the Charging Indicator light turns green.

    Step 2: Pair the printer and mobile device
    Install the HP sprocket app on your mobile device, and then pair your mobile device to the printer using a Bluetooth connection. The app is required to connect the printer and print photos from your mobile device.

    Go to the HP Sprocket (in English) homepage, and then follow the on-screen instructions to download and install the app.

    After the app installs, turn on the printer by holding the Power button until the Status Indicator light above the output slot is on.

    On your mobile device, open the Bluetooth settings menu, and then make sure Bluetooth is enabled.

    Android devices: On your mobile device, open the Location or Location Services menu, and then make sure the setting is turned on.
    NOTE: 
    HP does not track your location or keep a record of your location information. You can turn the setting off when you are not using the printer.

    Open the HP sprocket app.

    If a Welcome screen displays, tap the setup option, and then follow the on-screen instructions.

    Tap the Menu icon , tap sprocket, and then tap Manage Printers.
    A list of available Sprockets displays.

    If your printer displays, the printer is connected.

    If your printer does not display, tap Add New Printer, tap your printer, and then follow the on-screen prompts.

    FOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE & SKIP TO STEP 3 ONWARD
    (By the end of this article all the issues should be resolved)
     
    P.S: Welcome to HP Community 😉
     
    Let me know how that pans out,
    If you feel I was helpful, simply click on Accept as Solution to help the community grow,
    That said, I will have someone follow-up on this to ensure you’ve been helped,
    Just in case you don’t get back to us, 
    have a good day, ahead.

    Riddle_Decipher I am an HP Employee
    üzerinde Riddle_Decipher

yorum Yap

Lütfen unutmayın, yorumlar yayınlanmadan önce onaylanmalıdır.