Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
HP Sprocket'im düzgün yazdırmıyor
I_am_spruce119 tarafından tarihinde yayınlandı
Sprocket Studio, 300 dpi baskı sunar ve daha yüksek bir baskı kalitesi için boya süblimasyon teknolojisini kullanır. 6,6” x 10,75” x 2,7” boyutlarındaki gövde tasarımıyla bu yazıcı, seyahat için yeterince küçük kalırken size daha büyük, daha cesur baskılar verecek kadar büyüktür. Bluetooth aracılığıyla Sprocket Studio'ya bağlanın ve her işlemi HP Sprocket uygulamasından kontrol edin. Bu yazıcı, verimli kullanım için Energy Star sertifikalıdır ve hem Android hem de iOS cihazlarla çalışır.
← Daha eski gönderi Daha Yeni Gönderi →
@Tasha95, Welcome to HP Support Community!
TEJ1602 I am an HP EmployeeThis looks like a hardware issue.
Please reach out to the HP Support in your region regarding the service options for your printer.
Hope this helps!
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
Hi, I just followed all these instructions and my sprocket is still not printing. Only feeding out blank paper.
@I_am_spruce119
Welcome to HP forums, I see that sprocket is not printing anything.
Reset your mobile device and Sprocket
Turn off your mobile device, and then turn it back on.
Turn on the Sprocket.
Locate the Reset button.
HP Sprocket Photo Printer: Insert a straight pin into the access point next to the micro-USB charging port, and then press the Resetbutton for 3 seconds. The Sprocket resets and turns off.
HP Sprocket 200 Printer: Remove the paper cover, and then use a narrow object, such as a pen or paperclip, to press and hold the Reset button for 3 seconds. The Sprocket resets and turns off.
HP Sprocket Plus Printer: Remove the paper cover, insert a straight pin into the access point next to the input tray, and then press the Reset button for 3 seconds. The Sprocket resets and turns off.
HP Sprocket 2-in-1: Remove the paper cover, insert a straight pin into the access point next to the input tray, and then press the Resetbutton for 3 seconds. The Sprocket resets and turns off.
Turn on the Sprocket.
Update the Sprocket firmware
Make sure the Sprocket is on and your mobile device is connected to the Internet.
On your mobile device, open the HP sprocket app.
Tap the Menu icon , and then tap sprocket.
Tap Printer Settings, and then look for a firmware upgrade.
If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.
If a firmware upgrade option does not display, the firmware is up-to-date.
You can refer to this HP document for more assistance:- Click here
Sandytechy20 I am an HP EmployeeLet me know how it goes.
To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.
Cheers.