Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
有線接続とWi-Fi接続でプリンタのタッチパッドがフリーズする
I18n Error: Missing interpolation value "x" for "投稿者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
プリンタを新しいモデム（ArrrisサーフボードSBG6950AC2）に接続します。ケーブルを接続するか、ワイヤレスでセットアップすると、タッチスクリーンがフリーズします。しばらくは問題なく印刷できますが、プリンターがスリープ状態になり、再起動する必要があります。古いモデムを接続すると正常に動作します。新しいモデムはインターネットに正常に接続します。
I found the solution by using google. # 1 hit be exact. HP was of no help and gave wrong information. Had to go to settings and and make sure it was set to IPV4 and not IVP6. That solved the issue.
@dbennett804, Welcome to HP Support Community!
I see that you have issues with the printer after you changed the network, follow the steps below-
Update the printer firmware
Download available firmware updates from the HP website
With the printer on and connected to the computer, go to HP Customer Support – Software and Driver Downloads, and then identify your printer. Look for and install any available firmware updates. Refer to the document HP Printers – Updating or Upgrading Printer Firmware
You may need to instead go into your router settings and try changing the channel manually. Experiment with different channels to see which one works best. You can contact your ISP for help.
If the issue persists, I’d like to know the following for further assistance-
Are you able to print from the computer to the printer?
Are you able to make photocopies on the printer?
Keep me posted.
TEJ1602 I am an HP EmployeePlease click “Accepted Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!
Just another note. This is windows 10 and Mac connection