Sprocket 200がオンにならないのはなぜですか?

I18n Error: Missing interpolation value "x" for "投稿者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

HP Sprocket 200を少し前に入手しましたが、使用する機会がありませんでした。手順に従ってプリンターを再起動し、一晩充電しましたが、まだ赤く点滅しています。オンになっていないか、Bluetoothに接続していません。

 

誰か助けてもらえますか?


古い投稿 新しい投稿

I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| コメント"

  • @thephotoprinter
     
    Welcome to HP support community.

    Turn off the Sprocket, and then remove the paper cover.

    Remove any loose photo paper from the input tray, and then make sure the photo paper is in good condition. Remove any severely bent, wrinkled, or torn photo paper from the stack.
       CAUTION: 
    Do not try to remove any jammed paper from inside the paper path. This can damage the paper path rollers.

    Turn on the Sprocket.
    If there is jammed photo paper, the Sprocket feeds it through the output slot.

    Wait until the Sprocket is idle and silent, and then remove any photo paper fed through the output slot.

    Reload the photo paper with the HP logos facing down. Make sure to load genuine Sprocket photo paper, or the Sprocket might not print.

    Replace the paper cover, and then resend the print job.

    You can refer this HP document for more assistance:-Click here
     
    Let me know how it goes.
    To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.
    Cheers.

    Sandytechy20 I am an HP Employee
    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

コメントを残す