I18n Error: Missing interpolation value "x" for "投稿者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

こんにちは... 新品のスプロケットを持っていて、2時間以上完全に充電したところ、タブレットにスプロケットが完全に充電されたと書いてありました... もう一度充電する必要があることを示す赤いライトが点灯する前に、3枚のプリントしかありませんでしたか??スプロケットをリセットしてまた充電した... 再充電する前にまだ数枚のプリントしか取れない... これは正常ですか?充電が必要になるまでに何枚印刷すればいいの?どうもありがとう x

古い投稿 新しい投稿

I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| コメント"

  • @kittylamb
     You should be able to print 15 to 20 photos. Try to recharge the battery overnight and try printing. The charge should last for almost 4 hours.
    If issue persists, I suggest calling our phone support regarding warranty and service options.   

    1) Click on this link – www.hp.com/contacthp/
    2) Select the product type.
    3) Enter the serial number of your device or select let HP detect your product option.
    4) Select the country from the drop-down.
    5) You should see the HP phone support number or Chat option listed. 
    If you would like to thank us for our efforts to help you, feel free to give us a virtual high-five by clicking the ‘Thumbs Up’ icon below, 
    followed by clicking on the “Accept as solution” button.
    Have a great day!

    Roopa-S I am an HP Employee
    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
  • hi theremany thanks for your reoly….could you tell me roughly how many prints i could expect to get from one charge? many thanks helen

    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
  • @kittylamb
    Welcome to HP Forums, 
    This is a great place to get support, find answers and tips. Thank you for posting your query. I’ll be more than glad to help you out 🙂 
    The Sprocket battery should last longer than 3 prints. To fix this issue, please try the steps below:
    Solution 1: Update the printer Firmware:
    On your mobile device, open the HP sprocket app and make sure the printer firmware is up-to-date.
    Solution 2: To maximize the battery life of your Sprocket printer, try the steps below:
    There are several ways to make sure your battery lasts as long as possible. Use these recommendations to maximize battery life.

    Change how long the printer remains on: By default, the printer is set to turn off after 5 minutes. To change when the printer automatically turns off, open the HP sprocket app on your mobile device, and then tap the Menu icon  . Tap sprocket, and then tap Printer Settings. Tap Auto Off, and then select when you want the printer to turn off.

    Charge the printer when you are not using it: Leave the printer plugged into a power source whenever you are not using it.
    NOTE: You can use the printer while it is charging.

    Charge the printer for more than 90 minutes. HP recommends you charge the printer up to 90 minutes or until the power light turns green. However, you can charge the printer for longer than 90 minutes, which might increase battery life.

    Use an external battery charger. Using an external battery charger allows you to charge the printer when the battery is low and you cannot access another power source. To purchase an external battery charger, go to HP Home & Home Office. You can also purchase external battery chargers from other retailers.

    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

    Roopa-S I am an HP Employee
    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"