スプロケットがプリンターを見つけられない

I18n Error: Missing interpolation value "x" for "投稿者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

スプロケットアプリがスプロケットプリンターを見つけることができません。このプリンタを1年間使用しましたが、電源を入れると接続するだけです。スプロケットはBluetoothに正常に接続します。」しかし、スプロケットをクリックして印刷するアイテムを選択すると、プリンタが見つからないと表示されます。見ているが見つからないというメッセージが表示されます。以前のバージョンをクリックすると、それをクリックすると表示されます。クリックすると、アクセサリ、4行、その他何も選択されていません。トラブルシューティングの5つの手順を試し、アプリをアンインストール/再インストールしました。


古い投稿 新しい投稿

I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| コメント"

  • @ksrodriguez6, @Jo1136
     
    Let us try these steps to connect the sprocket to your iOS device:
     
    Reset the sprocket
    You can initiate a factory reset by using the steps below. 
    A factory reset can only be completed when the USB charging cable is NOT connected to the printer.
     
    1. Hold the power button for about 7 seconds in total. After 3 seconds, the Status LED light will turn off to indicate the printer is shutting down; continue to hold the Power button until the LED lights start to flash.
    2. Release the power button. The LEDs will continue blinking for about 6 seconds.
    3. While the LEDs are blinking, press and release the power button. The device will remain off until you power on again.
    4. Power on; the printer will be reset to factoring settings. After a factory reset, all settings are reset to factory defaults (Custom Name, LED color, Sleep Time, Auto-Off, etc.)
     
    Connect the iOS device to the sprocket
     
    1. Press and hold the Power Button for 3 seconds to turn on the printer. The LED will flash white as the printer powers on and remain solid white once fully powered on.
    2. Open iPhone® Settings and select Bluetooth. Turn Bluetooth on and then select the printer from the listed devices.
    3. Next, launch the sprocket app. See “Installing Mobile App” for more information.
    • A reminder message will appear if you try to print a photo and are not paired with your HP printer.
    • If your mobile device and printer will not pair, try resetting the printer. For instructions, see FAQ “How do I reset my printer?”
    • Only one iOS device can pair with the printer at a time. To share the printer, turn off Bluetooth and allow someone else to pair.
     
    Previously paired Bluetooth accessories such as Apple AirPods might interfere with the initial discovery of the Sprocket. Unpair the accessory from the Bluetooth menu of your device before initial pairing with your Sprocket. The accessory can then be paired again after the Sprocket is connected.

    On your mobile device, open the HP sprocket app.

    Tap the Menu icon , tap sprocket, and then tap Manage Printers.
    A list of available Sprockets displays.

    If your Sprocket displays: The Sprocket is connected.

    If your Sprocket does not display: Tap Add New Printer, and then tap the name of your Sprocket.

    For more info on resolving connectivity issues, kindly refer to this document.
     
    Hope this helps! Keep me posted. 
     
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
    Have a great day! 

    KUMAR0307 I am an HP Employee
    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
  • I have the same issue with my iPhone. It is the first sprocket model and when I try to connect, my Accessories menu is also empty but it connects fine to Bluetooth.

    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
  • I’m using my iphone xr, I cant do the 5 steps to resolve the issue because when i tapped the Menu icon, tapped sprocket, and manage printers… mine doesn’t show up. I uninstalled the app, and still refuses to connect to my iphone through the app but perfectly fine on the bluetooth setting. It can’t seem to locate my printer, even if both devices are close together. Is there anything I can do to fix the issue?  

    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
  • Hi @ksrodriguez6
    Welcome to the HP Support Community. I’d be happy to assist you.
     
    On which device are you using the Sprocket app?
     
    Kindly perform the steps mentioned in this document to resolve this issue.
     
    I hope this helps! Keep me posted. 
     
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
    Have a great day! 

    KUMAR0307 I am an HP Employee
    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

コメントを残す