Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
スプロケット2000がBluetoothに接続されていません
I18n Error: Missing interpolation value "x" for "投稿者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
私は馬力スプロケット2000を持っています。最初はそれが初めてうまくいった、それは印刷され、私はそれを最新の会社に更新したが、私はそれを充電するためにそれを残して、それが切断されたことを見つけるためにそれを使用するために戻ってきたので、私はそれを再接続しようとした。再接続していなかったので、アプリを削除してスプロケットをリセットすることにしました。それでもBluetooth経由で接続できず、画面にオプションとして表示されません。今日買ったばかりでこれにはがっかりしています。直せる方法はありますか
@R_1075I suggest you follow the below steps to resolve the issue:After sending a print job to your Sprocket, the print job does not print.Make sure the Sprocket is charged, connected to your mobile device over a Bluetooth connection, and the Sprocket firmware is up-to-date. Step 1: Turn on the Sprocket and check battery statusThe Sprocket might have turned off or the battery might need to be charged. Use the HP sprocket app to check the battery status, and then adjust the Auto Off setting.
Press and hold the Power button to turn on the Sprocket, and then open the HP sprocket app.
Tap the Menu icon , and then tap sprocket.
Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.
Under the Status section, locate Battery.
If the battery charge is 25% or higher, continue with these steps.
If the battery chage is 24% or lower, charge the battery for 30 minutes, and then continue with these steps.
Tap Auto Off to change when the Sprocket turns off, if necessary.
If the issue persists, continue to the next step.
Riddle_Decipher I am an HP EmployeeFOR DETAILS & FURTHER INSTRUCTIONS, USE THIS LINK: CLICK HERE (STEP 2 ONWARD)
(By the end of this article all the issues should be resolved)
Let me know how that pans out,
If you feel I was helpful, simply click on Accept as Solution to help the community grow,
That said, I will have someone follow-up on this to ensure you’ve been helped,
Just in case you don’t get back to us within 24 – 48hrs, and have a good day, ahead.