hp sprocketは、ペアリング後に電話に接続しません

I18n Error: Missing interpolation value "x" for "投稿者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

推奨される手順は、インストールされているFWとアプリのように見えるものには対応していません。電話はプリンターに接続します。ただし、HP Sprocketアプリは、最初に新しいFWのダウンロードに接続してから、プリンターへの接続を検出し、最初の試行からアップグレードできるようにすることはできません。提案されたすべてのトラブルシューティング手順を試しましたが、どれも機能しませんでした。HPフォーラムからのすべての提案は、シーケンスが異なるだけで同じでした(Upairデバイス、アプリのアンインストール、アプリの再インストール、デバイスの再接続)。インストールが完了するまで数回インストールを再試行することで、ファームウェアをアップグレードできました。


古い投稿 新しい投稿

I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| コメント"

  • What you posted is what I mentioned I did following all the postings and troubleshooting provided. I was succesful in updating the FW by persistenly retrying until it went through. The suggested fix of App uninstall, device connection removal, etc. might be needed but end user has to give it a few tries until it works.

    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
  • Hello @pedroih -  Can you try completely closing the Sprocket app (double click home button, then swipe up on Sprocket app to close), then reopen the app and see if you’re able to connect? Ideally you can make sure you have the latest firmware version (Menu → sprocket → Printers → Firmware Version), which should be 1.1.5. If the app isn’t showing a connection to the device, I’d once again suggest completely closely the app and restarting it. Thanks,-Brandon

    *I am an HP employee*The comments above represent myself and do not reflect the opinions of HP.If my post solved your issue, please click “Accepted Solution” on the post . To show appreciation for my help, please click the “Thumbs Up Icon” below! Thank you 🙂

    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"
  • Hi @pedroih,
     
    Thanks for engaging in HP support Forums! This is a wonderful location to converse with the community, get assistance and find tips! I understand you are having issues with the HP Sprocket won’t connect to the phone. Don’t worry I’ll do my best to help you with this.
     
    At the outset, you’ve diagnosed the issue perfectly before posting the query on HP forums. Excellent job on that score. Kudos to you for that.
     
    It is always a privilege to work with technically savvy customers. I take it as a privilege to share this platform with you. We value your relationship with HP and wish to serve you better.
     
    Let’s start off by performing a reset on the printer: 
     
    Reset the printer again.

    Locate the reset button near the charging port.
    Figure : Locating the reset button

    Gently insert a straight pin into the reset button access point, and then press the reset button for 3 seconds.
    The printer resets and turns off.

    Press and hold the power button until the Status Indicator light is solid and white.
    The printer is now ready to print.

    Charge your sprocket battery to at least 50%
    Power off your sprocket printer
    In the iPhone Bluetooth menu (Settings → Bluetooth), tap the ‘i’ button next to the “sprocket” device, then tap “Forget This Device”
    Restart your iPhone by pressing/holding the power button for 3 seconds, then sliding to power off.
    Power on your sprocket printer
    Discover and pair your sprocket printer by tapping on the “sprocket” device when it appears in the iPhone Bluetooth menu (Settings → Bluetooth).
    Open the sprocket mobile app, where you’ll be automatically prompted for the firmware upgrade.
    Once done, try to check if it’s resolved.

    Alternatively, you can go through this link: Click here
     
    Let me know if those steps worked for you.
    If they did, that’s awesome!
    Give us some reinforcement by clicking the solution and kudos buttons,
    That’ll help us and others see that we’ve got the answers!
    Good Luck.
     

    Jeet_Singh I am an HP Employee
    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

コメントを残す