紙の蓋が付いていないというHPのスプロケット

I18n Error: Missing interpolation value "x" for "投稿者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

やあ！HPスプロケットが赤く点滅し続け、蓋がオンになっていないと言っています。スプロケットをリセットし、アプリを更新し、新しい用紙を入れて、スプロケットを再充電しようとしましたが、何も機能しないようです

← 古い投稿 新しい投稿 →

I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| コメント"

  • @kaylee-k
     
    Welcome to the HP support community.

    Turn off the Sprocket, and then remove the paper cover.

    Remove any loose photo paper from the input tray, and then make sure the photo paper is in good condition. Remove any severely bent, wrinkled, or torn photo paper from the stack.
       CAUTION: 
    Do not try to remove any jammed paper from inside the paper path. This can damage the paper path rollers.

    Turn on the Sprocket.
    If there is jammed photo paper, the Sprocket feeds it through the output slot.

    Wait until the Sprocket is idle and silent, and then remove any photo paper fed through the output slot.

    Reload the photo paper with the HP logos facing down. Make sure to load genuine Sprocket photo paper, or the Sprocket might not print.

    Replace the paper cover, and then resend the print job.

    You can refer this HP document for more assistance:- Click here
     
    I hope that helps.
    To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.
    Cheers.

    Sandytechy20 I am an HP Employee
    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

コメントを残す