SprocketStudioのヘルプ

I18n Error: Missing interpolation value "x" for "投稿者 |@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

こんにちは。スプロケットスタジオでトラブルに遭った人はいますか?私は今、6ヶ月で3番目になりました!!現在のものと2日前に返却したものは、それぞれ1枚の写真を印刷しました。紙詰まり、彼らはすべて、カートリッジを数回試した後に交換する必要があると私に言います、彼らはカートリッジを破壊し、私がそれを主電源に何時間も差し込んだときにバッテリーが少なくなっていると私に言います!3番目を別の店舗で購入したが、それでも同じ問題


古い投稿 新しい投稿

I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| コメント"

  • @Mon-Maro_1
    Thank you for posting on HP Support Community.
     
    Don’t worry as I’ll be glad to help, I have a few troubleshooting steps we could try to fix the issue:  
    You can initiate a factory reset by using the steps below. A factory reset can only be completed when the USB charging cable is NOT connected to the printer.  

    1. Hold the power button for about 7 seconds total. After 3 seconds, the Status LED light will turn off to indicate the printer is shutting down; continue to hold the Power button until the LED lights start to flash.  
    2. Release the power button. The LEDs will continue blinking for about 6 seconds.  
    3. While the LEDs are blinking, press and release the power button. The device will remain off until you power on again. 4. Power on; the printer will be reset to factoring settings. After a factory reset, all settings are reset to factory defaults (Custom Name, LED color, Sleep Time, Auto-Off, etc)

    Hope this helps! Keep me posted for further assistance.
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.

    ECHO_LAKE I am an HP Employee
    I18n Error: Missing interpolation value "x" for "|@plgn|{{ x }} |plgn@| on |@plgn|{{ x }} |plgn@|"

コメントを残す