Linea bianca sopra le foto della ruota dentata HP

Inserito da Engla su

C'è sempre una "linea" bianca nella parte superiore delle foto di HP Sprocket quando le stampo. Tutto è iniziato un po' di tempo fa e non so quale sia il problema. Aiuto per favore?

Inglese xx

← Post più vecchio Post più recente →

1 commento

  • @Engla
     
    Clean the Sprocket paper path rollers
     
    Dirt and debris on the paper path rollers can cause print quality issues. Use the colored Print Quality Card (formerly the Smartsheet) from the same pack of HP ZINK photo paper currently in the Sprocket to clean the paper path rollers.
    NOTE: 
    To avoid print quality issues, do not use a colored card from a different pack of photo paper.

    Remove the Paper Cover, and then remove any photo paper from the input tray.

    Roll the paper path rollers back and forth several times.

    Check the photo paper and remove any severely bent, wrinkled, or torn photo paper from the stack.

    Reload the photo paper with the colored card on the bottom of the stack with the barcode facing down.

    Replace the Paper Cover, and then send a print job.

    Refer to this document: https://support.hp.com/in-en/product/hp-sprocket-photo-printer/12635221/document/c05660842 for Improving Print Quality.
     
    Keep me posted, how it goes!
    If the information I’ve provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that’ll help us and others see that we’ve got the answers!
     
    Thank you for joining the HP Community:)
    Have a great day!
    Cheers:)

    Raj1788I am an HP Employee 
    Raj1788 su

lascia un commento

Si prega di notare che i commenti devono essere approvati prima di essere pubblicati