Opzioni di aggiornamento del firmware della ruota dentata

Inserito da GJ63 su

من خلال اتصال Bluetooth® السلس ، يمكن للجميع استخدام صور Google لطباعة وعرض الألبومات رماتةر. استخدم تطبيق HP Sprocket لمشاركة كل الصور المطبوعة على Pignone. قم بتسمية جهاز Pignone الخاص بك وقم بتخصيص لون LED الذي يضيء عند الطباعة

quindi qualcuno per favore mi dia un numero di telefono o una posizione a cui rispedire il mio spocket, ottenere un rimborso o chiedere a qualcuno di aggiornare il firmware in modo che funzioni. PER FAVORE.


Post più vecchio Post più recente

1 commento

  • @GJ63,
     
    Welcome to the HP Forums!
     
    Thank you for posting your query on this forum, it’s a great place to find answers.
     
    I reviewed your post and I understand that you are facing issues with your sprocket printer.
     
    Don’t worry, I assure you I will try my best to get this sorted.
     
    In order that I may provide you with an accurate solution, I will need a few more details.

    What is the exact issue you are facing?
    Have you performed any troubleshooting steps before posting?

    Meanwhile, I recommend you follow the below steps and check if it helps.
     

    Turn on the printer.

    Locate the Reset button near the charging port.

    Gently insert the straight pin into the reset button access point, and then press the Reset button for 3 seconds.
    The printer resets and turns off.

    Turn on the printer.

    Follow the below steps to update the printer firmware.
     
    Make sure your mobile device is connected to the Internet and then open the HPSprocket app. If there is a firmware update available, a firmware update screen displays. Follow the on-screen prompts to complete the update. Your printer must be charged to 50% or higher before a firmware update.
     
    Let me know how it goes and you have a great day!
     
    If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!
     
    Cheers!
     

    The_Fossette I am an HP Employee
    The_Fossette su

lascia un commento