Problema di stampa

Inserito da JY1u1 su

Salve, ho recentemente acquistato l'Hp Sprocket 200 ed è la seconda volta che lo uso. Questo problema non si è verificato la prima volta, ma la foto stampata sembrava macchiata e si è verificato per tutte e quattro le foto. Ho provato a risolverlo con lo smart sheet blu ma non ha aiutato affatto con il problema. Ho aggiornato l'hardware appena prima di utilizzare la seconda volta. Ha qualcosa a che fare con questo? 

← Post più vecchio Post più recente →

1 commento

  • Hi @JY1u1,
     
    I’d like to help!
     
    Try the below suggestions-
     
    Clean the Sprocket paper path rollers
    Dirt and debris on the paper path rollers can cause print quality issues. Use the colored Print Quality Card (formerly the Smartsheet) from the same pack of HP ZINK photo paper currently loaded in the Sprocket to clean the paper path rollers.
    NOTE: 
    To avoid print quality issues, do not use a colored card from a different pack of photo paper.

    Remove the Paper Cover, and then remove any photo paper from the input tray.

    Check the photo paper and remove any severely bent, wrinkled, or torn photo paper from the stack.

    Reload the photo paper with the colored card on the bottom of the stack with the barcode facing down.

    Replace the Paper Cover, and then wait while the Sprocket detects and cleans the paper path rollers with the colored card.
    If the Sprocket does not automatically detect the colored card, send a print job to manually start the cleaning process.

    If the print quality is still unacceptable, continue to the next step.
     
    Other things to try
    The following tips might help improve print quality.

    Make sure the lighting is sufficient to clearly see the subject of your photo. Use the flash on your mobile device to improve the photo quality.

    Use the HP sprocket app Autofix feature. On the print preview screen, tap Edit or the Edit icon , and then tap the Autofix wand  or . The app adjusts the photo automatically. Tap the Checkmark  to save the changes, and then tap the Print icon .

    Use the HP sprocket app to adjust photo contrast and brightness. On the print preview screen, tap Edit or the Edit icon , and then tap the Adjustments icon . Adjust the brightness and contrast, tap the Checkmark  to save any changes, and then tap the Print icon .

    Allow the Sprocket a few minutes to cool down between print jobs.
    When the Sprocket becomes too warm, a cooling down message might display on the HP sprocket app. Allow the Sprocket to cool, and then tap OK to clear the message.

    Store the photo paper in a cool, dry place and avoid contact with water. If water spills on the photo paper, wipe it away as soon as possible to prevent damaging the photo paper.

    You may refer -Improving Print Quality
     
    Hope this helps! Keep me posted. 
     
    And, Welcome to the HP Support Community. 
     
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping

    Jay_G24 su

lascia un commento

Si prega di notare che i commenti devono essere approvati prima di essere pubblicati