Inserito da ATO18 su

Ciao, il mio nuovo HP Sprocket si collega al mio Samsung Galaxy 7 Andriod ma nonostante emetta suoni di stampa, in realtà non stampa. Ho provato a ripristinare inserendo il pin, cercando gli aggiornamenti del firmware (ricevuto un messaggio di errore) e ho cercato un software aggiornato per l'app per il mio telefono. Niente ha aiutato. Qualsiasi informazione sarebbe apprezzata.

Post più vecchio Post più recente

3 commenti

    Thanks for the update,
    As you have already exhausted all the steps and still having the issue. I would recommend you contact our HP phone support for further assistance. 
    Please follow the link from the previous post to get in touch with them.
    Let me know if you encounter any difficulty contacting them. I’ll be more than glad to help you.
    Keep me posted,
    If the information I’ve provided was helpful,
    give us some reinforcement by clicking the solution and kudos buttons,
    that’ll help us and others see that we’ve got the answers!
    Good Luck.

    Jeet_Singh I am an HP Employee
    Jeet_singh su
  • Hi Jeet,  I’ve done as you’ve suggested a number of times without success. The printer, as mentioned, simply makes a whirring noise as if printing but nothing comes out. The software seems to also think that printing has occured as I receive a completion message. Please advise. Anna

    ATO18 su
  • @ATO18, Allow me to welcome to HP Support Forums! It is a great platform to get help from the community, get suggestions and find what has worked for others!
    I see that you are facing issues with the HP Sprocket after the update. Please try the steps listed here to try and fix the issue: http://hp.care/2py3PiwTry the steps listed under “What if the printer does not print?”. Charge the printerA low battery can cause poor print quality. Check the printer battery level using the HP Sprocket app to determine if the printer needs charged.

    On your mobile device, open the HP Sprocket app.
    Tap the Menu icon , and then tap your printer in the list.

    The printer information screen displays.

    Under the Status section, locate Battery.

    If the battery charge is 50% or higher, continue to the next step.
    If the battery charge is 49% or lower, charge the printer.

    The printer is fully charged when the Indicator light is solid and green.

    After the printer is fully charged, try to print.

    If the issue persists let’s try to reset the printer: 
    If the printer does not print when you send a print job or turn on when you press the power button, reset the printer with a straight pin to clear any errors.

    Turn on the printer.
    Locate the reset button near the charging port.Figure : Locating the reset button
    Gently insert the straight pin into the reset button access point, and then press the reset button for 3 seconds.The printer resets and turns off.
    Turn on the printer.

    Next step would be to perform a printer firmware update.
    Upgrade the printer firmware
    HP regularly releases printer updates. Upgrading the printer firmware might resolve the issue.

    Make sure the printer is on and your mobile device is connected to the Internet.
    On your mobile device, open the HP Sprocket app.
    Tap the Menu icon , and then tap your printer in the list.

    The printer information screen displays.

    Look for a printer firmware upgrade.

    If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.
    If a firmware upgrade option does not display, the printer firmware is up to date. Continue to the next step.

    After updating the printer firmware, try to print.

    If you have followed the steps suggested and still having the issue, I would suggest you contact our HP phone support for further assistance. 
    HP Support can be reached by clicking on the following link: 

    Click on this link – www.hp.com/contacthp/
    2) Click on “Continue as guest”.
    3) Enter the serial of your device.
    4) Select the country from the drop-down.
    5) Click on “Show Options”.

    Fill the web-form. A case number and phone number will now populate for you.
    Hope this helps, for any further queries reply to the post and feel free to join us again
    Feel free to post your query for any other assistance as well,
    It’s been a pleasure interacting with you and I hope you have a good day ahead.
    If you wish to show appreciation for my efforts, mark my post as Accepted Solution.
    And click on the Purple Thumbs up icon at the bottom of my comment.

    Jeet_Singh I am an HP Employee
    Jeet_singh su

lascia un commento

Si prega di notare che i commenti devono essere approvati prima di essere pubblicati