Come cambiare il colore del carattere da bianco a un altro colore?

Inserito da ASteidler su

مصم للاسGخدام مع تطبيقze Bluetooth و hp Sprocke

Post più vecchio Post più recente

1 commento

  • @ASteidler
    Welcome to HP Support Forums. A really great platform for posting all your questions and finding solutions.
    I have gone through your Post and I’ll try my best to help
    Try updating the Sprocket Firmware

    Make sure the printer is charged 50% or more.

    Make sure the printer is on and your mobile device is connected to the Internet.

    On your mobile device, open the HP sprocket app.

    Tap the Menu icon , and then tap sprocket.

    Tap Printers, and then tap your printer in the list.
    The printer information screen displays.

    Look for a firmware upgrade.

    If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.

    If a firmware upgrade option does not display, the printer firmware is up-to-date.

    Also ensure the HP Sprocket Paper and Blue Smartsheet is loaded properly

    Turn off the printer.

    Remove the top cover by sliding it away from the output slot, and then set it aside.
    Figure : Removing the top cover

    Slide the top cover

    Remove the top cover

    Remove any loose photo paper from the input tray.

    Reload the HP Sprocket Photo Paper with the blue Smartsheet®. Make sure the blue Smartsheet® is on the bottom of the stack with the bar-code facing down, and the HP Sprocket Photo Paper with the HP logos facing down.

       NOTE:Keep the Smartsheet® until you are done with all 10 sheets, and then discard it.

    Figure : Loading HP Sprocket Photo Paper

    Align the top cover with the tracks on the outside of the printer, and then slide the top cover toward the output slot until it is firmly seated.
    Figure : Closing the top cover

    Align the top cover

    Slide the top cover

    Turn on the printer, and then resend the print job.

    If the issue persists, let’s reset the Sprocket

    Turn on the printer.

    Locate the reset button near the charging port.
    Figure : Locating the reset button

    Gently insert the straight pin into the reset button access point, and then press the reset button for 3 seconds.
    The printer resets and turns off.

    Turn on the printer.

    Please perform these steps at your convenience and keep me posted how it goes 👍
    Thank you and have a wonderful weekend 😊
    If the information I’ve provided was helpful, give us some reinforcement by clicking the “Solution Accepted” and this will also help other community members with similar issue.

    KrazyToadI Am An HP Employee
    KrazyToad su

lascia un commento

Si prega di notare che i commenti devono essere approvati prima di essere pubblicati