Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
rosso lampeggiante
Inserito da Jin823 su
ho una ruota dentata 2 in 1 ho comprato carta nuova e l'ho ricaricata ora lampeggia una luce rossa lampeggiante ce l'ho solo un anno e l'ho usata una manciata di volte.l'ho ripristinato, dice che il coperchio superiore non è completamente acceso dopo averlo ripristinato.sono in perdita e ne sono molto frustrato. AIUTO lol
← Post più vecchio Post più recente →
@Jin823
Welcome to HP support community.
Turn off the Sprocket, and then remove the paper cover.
Remove any loose photo paper from the input tray, and then make sure the photo paper is in good condition. Remove any severely bent, wrinkled, or torn photo paper from the stack.
CAUTION:
Do not try to remove any jammed paper from inside the paper path. This can damage the paper path rollers.
Turn on the Sprocket.
If there is jammed photo paper, the Sprocket feeds it through the output slot.
Wait until the Sprocket is idle and silent, and then remove any photo paper fed through the output slot.
Reload the photo paper with the HP logos facing down. Make sure to load genuine Sprocket photo paper, or the Sprocket might not print.
Replace the paper cover, and then resend the print job.
You can refer this HP support community for more assistance:- Click here
Sandytechy20 I am an HP EmployeeI hope that helps.
To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.
Cheers.