Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
Ne s'allume pas
Publié par Lwelsh le
Au 1er, mon pignon ne contactait pas mon téléphone, alors je l'ai réinitialisé et maintenant il ne s'allume plus du tout !
lorsque je le branche, un voyant rouge fixe s'allume pendant environ 10 secondes, puis s'éteint, mais c'est tout ce qu'il fait.
Que puis-je faire?
← Article plus ancien Message plus récent →
@LwelshThank you for posting back. I would request you to reach out to our Support and our Support Engineers should be able to sort this out. HP Support can be reached by clicking on the following link: www.hp.com/contacthp/
ECHO_LAKE I am an HP EmployeePlease feel free to contact us here anytime you need any further assistance. Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Hi, thank youit has been on charge all night and still won’t turn on so it can’t connect to the sprocket app!!! before it wouldn’t turn on the only thing I did was reset it because we couldn’t get it to connect to the app at all, the the whole thing won’t do anything???? please help as this is my daughters and is upset 😢 thanks, Leanne
@Lwelsh
Thank you for posting on HP Support Community.
Don’t worry as I’ll be glad to help, I have a few troubleshooting steps we could try to fix the issue:
The Sprocket might have turned off or the battery might need to be charged. Use the HP sprocket app to check the battery status, and then adjust the Auto Off setting. Press and hold the Power button to turn on the Sprocket, and then open the HP sprocket app. Tap the Menu icon, and then tap sprocket.
Step 1: Turn on the Sprocket and check battery status
ECHO_LAKE I am an HP EmployeeStep 2: Make sure the Sprocket has photo paper in the input tray
Step 3: Confirm mobile device settings
Step 4: Reset your mobile device and Sprocket
Step 5: Upgrade the Sprocket firmware
Click here: https://support.hp.com/in-en/document/c05937610 to complete the troubleshooting steps.
Hope this helps! Keep me posted for further assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.