bleu d'impression de pignon

Publié par jlee32 le

J'ai acheté un pignon hier et j'étais vraiment excité de commencer à imprimer, mais toutes mes photos sont sorties avec une teinte bleue. J'ai essayé de redémarrer, de repasser la feuille intelligente, de mettre à jour le micrologiciel et toutes les possibilités suggérées sur le support hp. Cependant, cela n'a pas résolu le problème! Je suis très déçu, est-ce à cause d'un mauvais lot de papier photo ? Comment puis-je résoudre ça


Article plus ancien Message plus récent

6 commentaires

  • Good afternoon guys
    I to have this annoying blue tint which I didn’t have in the beginning so I’m very disappointed with my new device…..:-(
    Have tried all the trouble-shooting suggestions but to no avail
    HELP!!

    Charmain le
  • Hello guys,
    I have the same problem – all prints are blue. Have gone through all the steps(reset,firmware etc) which you advised in other topics, but still nothing – it all prints blue.
    Please assist.
    Thanks.

    Nick le
  • Hi my pictures on my new hp sprocket select are printing out with a blue tint and I’ve tried recalibration and doing all the steps the hp virtual agent told me too and the firmware is also updated. What do I do now?

    Nour le
  • @Lbk3
     
    The possible steps that could resolve the printer quality issue are in this document: https://support.hp.com/in-en/document/c05660842
     
    If you have tried all the steps in the above document, I would personally suggest you contact our HP Support. 
     
    Click here: https://support.hp.com/us-en/contact-hp?openCLC=true
     
    Make sure you select the Country and Region.
     
    Keep me posted, how it goes!
    If the information I’ve provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that’ll help us and others see that we’ve got the answers!
     
    Welcome to the HP Community:)
    Have a great day!
    Cheers:)

    Raj1788I am an HP Employee 
    Raj1788 le
  • I also have the same issue. I have updated firmware, re calibrated multiple times and reset with no luck – still getting blue tinged photos 

    Lbk3 le


laissez un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés