Options de mise à jour du micrologiciel Sprocket

Publié par GJ63 le

من خلال اتصال Bluetooth® السلس ، يمكن للجميع استخدام صور Google لطباعة وعرض الألبومات ترمش. HP Sprocket لمشاركة كل الصور المطبوعة على Sprocket. قم بتسمية جهاز Pignon الخاص بك وقم بتخصيص لون LED الذي يضيء عند الطباعة

quelqu'un pourrait-il me donner un numéro de téléphone ou un emplacement pour renvoyer mon spocket, obtenir un remboursement ou demander à quelqu'un de mettre à jour le micrologiciel afin qu'il fonctionne. S'IL VOUS PLAÎT.

Article plus ancien Message plus récent

1 commentaire

  • @GJ63,
    Welcome to the HP Forums!
    Thank you for posting your query on this forum, it’s a great place to find answers.
    I reviewed your post and I understand that you are facing issues with your sprocket printer.
    Don’t worry, I assure you I will try my best to get this sorted.
    In order that I may provide you with an accurate solution, I will need a few more details.

    What is the exact issue you are facing?
    Have you performed any troubleshooting steps before posting?

    Meanwhile, I recommend you follow the below steps and check if it helps.

    Turn on the printer.

    Locate the Reset button near the charging port.

    Gently insert the straight pin into the reset button access point, and then press the Reset button for 3 seconds.
    The printer resets and turns off.

    Turn on the printer.

    Follow the below steps to update the printer firmware.
    Make sure your mobile device is connected to the Internet and then open the HPSprocket app. If there is a firmware update available, a firmware update screen displays. Follow the on-screen prompts to complete the update. Your printer must be charged to 50% or higher before a firmware update.
    Let me know how it goes and you have a great day!
    If you wish to show appreciation for my efforts, mark my post as Accept as Solution. Your feedback counts!

    The_Fossette I am an HP Employee
    The_Fossette le

laissez un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés