Réglage de la couleur du pignon

Publié par FriendlySkies1 le

Aucun problème de réglage hp mon Sprocket -yea ! Cependant, mes arbres verts impriment en jaune Existe-t-il un moyen de régler cela ? La couleur de l'aperçu est correcte.

Article plus ancien Message plus récent

4 commentaires

  • Just got my printer today and printer a few pictures.  I’m extremely disappointed to say the least.  These pictures look like they are something that was printed on 110 film from the 1980’s and sitting in a sticky film photo album.  Just downloaded  your suggested firmware to fix the yellow hue, but did nothing.  Same printed picture looks exactly the same.  While not super expesive, have visible pictures are not at all worth the money. any other ideas before my printer and 10 boxes of paper go back to the store after less that 24 hours???

    Cfelty2 le
  • although this is an old thread i too had similar color issues/yellow—-the color accuracy of the prints were greatly improved by updating the firmware of the sprocket—this is from another thread on how to update firmware "Secondarily, today we released an updated firmware code that does have color map improvements.  You can upgrade by following the instructions below: First, make sure the Sprocket is charged to at least 75% battery and powered on.Ensure the Sprocket is paired to your mobile device.On your mobile device, open the HP Sprocket app and go to menu → sprocket → Printers; A ‘blue’ firmware update link will be present or a pop-up message will appear if an update is available.After clicking the link or upgrade prompt, follow onscreen process/instructions."

    esg121 le
  • Hi. Yes, I did use the calibration card as instructed. with the ten sheet starter pack. I made sure it and the paper were loaded properly. The calibration card ejected first then the photo. Another pic I printed had some darker green that printed ok, but the lighter greens were still more yellow. And a magenta flower printed more orangey than pink.

    FriendlySkies1 le
  • Hi,Thanks for using the HP Forums. Have you calibrated the photo pack with the calibration card? Please check this out on how to setup, connect and print: http://h30434.www3.hp.com/t5/sprocket/Sprocket-How-to-setup-and-Use-the-HP-Sprocket-Printer-amp/td-p… Hope that helps.

    I am an HP EmployeeAlthough I am speaking for myself and not for HP.Please click “Kudos Thumbs up” as an encouragement and “Accept as solution” if this has helped solved your problem.

    greenturtle le

laissez un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés