Diagnostic
There are 0 items in your cart
View all items >Sub-totalbefore tax & fees
$0.00
Sprocket 200 n'apparaissant pas dans "Paramètres Bluetooth" sur iOS et Android
Publié par Emil-b le
Salut,
hp-sprocket-4-x-6-in-10-x-15-cm-papier-photo-et-cartouches-80-feuilles-4kk83a-arabe
J'ai suivi le guide à 100%, il est complètement chargé et tout mais rien n'y fait - ce qui signifie que je ne peux même pas mettre à jour le firmware.
Autant que je sache, beaucoup de gens vivent cela.
Nous avons essayé à la fois sur mon iPad et sur le Huawei de mes copines sans succès.
Nous avons acheté l'appareil dans un seul but : l'utiliser lors de notre mariage. Assez frustrant
Salutations,
Émile
← Article plus ancien Message plus récent →
@Emil-b
Please ensure the Sprocket Firmware is up to date
Make sure the Sprocket is on and your mobile device is connected to the Internet.
On your mobile device, open the HP sprocket app.
Tap the Menu icon , and then tap sprocket.
Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.
Under the Status section, locate Battery.
If the battery charge is 25% or higher, continue with these steps.
If the battery charge is 24% or lower, charge the battery for at least 30 minutes, and then continue with these steps.
In Printer Settings, look for a firmware upgrade.
If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.
If a firmware upgrade option does not display, the firmware is up-to-date.
If the issue persists please reset the Sprocket
Make sure the printer is on.
Remove the paper cover.
Locate the Reset button.
With a paperclip or pin, press and hold the Reset button until the Charging Indicator light turns off.
The printer resets and turns off.
Replace the paper cover, and then turn on the printer.
Also ensure on your iOS and Android Devices you forget the Sprocket from Bluetooth settings and restart the devices
KrazyToadI Am An HP EmployeeTry connecting and let me know how it goes 😊
If the information I’ve provided was helpful, give us some reinforcement by clicking the “Solution Accepted” on this Post and it will also help other community members with similar issue.