Mon HP Sprocket imprime avec une mauvaise qualité. Les imprimés apparaissent délavés ou roses.

Publié par hannahfoss le

حوّل لحظاتك المفضلة إلى صور أو ملصقات فورية مقاس 2,3 × 3,4 بوصة (5.8 × 8.7 سم) خالية من البقع وملصقات ، خاصة لطراز Sprocordage plus 0 sprocgard.

Article plus ancien Message plus récent

4 commentaires

  • @hannahfoss
    This looks like a hardware issue. 
    Please reach out to the HP Support in your region regarding the service options for your printer.
    Hope this helps!
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

    TEJ1602 I am an HP Employee
    TEJ1602 le
  • I am printing from my iPhone 7, and have tried printing from my iPad mini, but that didn’t solve anything. 

    hannahfoss le
  • Thank you so much for replying! However, I have done all of those steps and nothing has resolved the issue. What should I do next? 

    hannahfoss le
  • @hannahfoss, Welcome to the HP Support Community!
    Which mobile device are you trying to print from?
    Have you tried printing different pictures or from different mobile device and check if the issue persists?
    For now, let us try these steps: 
    Upgrade the Sprocket firmware

    Make sure the Sprocket is on and your mobile device is connected to the Internet.

    On your mobile device, open the HP sprocket app.

    Tap the Menu icon , and then tap sprocket.

    Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.

    Under the Status section, locate Battery.

    If the battery charge is 25% or higher, continue with these steps.

    If the battery charge is 24% or lower, charge the battery for at least 30 minutes, and then continue with these steps.

    In Printer Settings, look for a firmware upgrade.

    If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.

    If a firmware upgrade option does not display, the firmware is up-to-date.

    Send a print job. If the print quality is still unacceptable, continue to the next step.
    Perform step 3 and 4 from this document.
    Let me know how this goes.
    If you feel my post solved your issue, please click “Accept as Solution”, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

    KUMAR0307 I am an HP Employee
    Kumar0307 le

laissez un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés