J'ai récemment reçu un HP Sprocket 2-en-1

Publié par DT791 le

J'ai récemment acheté un HP Sprocket 2-en-1. J'ai suivi les instructions et cela a fonctionné pour une image imprimée. Maintenant, il clignote en rouge indiquant que le couvercle du papier de l'imprimante est ouvert mais qu'il est fermé. Comment puis-je réparer cela? J'ai essayé la réinitialisation et toujours rien ..... Aidez-moi s'il vous plaît !

Article plus ancien Message plus récent

1 commentaire

  • @DT791
    Thank you for joining the HP Support Community
    Appreciate all your efforts.
    You might not see an error message when printing instant photos with the HP Sprocket 2-in-1 or when printing photos from the print queue. Restart the Sprocket to clear any errors, and then load genuine Sprocket photo paper.

    Turn off the Sprocket, and then remove the paper cover.

    Remove any loose photo paper from the input tray, and then make sure the photo paper is in good condition. Remove any severely bent, wrinkled, or torn photo paper from the stack.
    Do not try to remove any jammed paper from inside the paper path. This can damage the paper path rollers.

    Turn on the Sprocket.
    If there is jammed photo paper, the Sprocket feeds it through the output slot.

    Wait until the Sprocket is idle and silent, and then remove any photo paper fed through the output slot.

    Reload the photo paper with the HP logos facing down. Make sure to load genuine Sprocket photo paper, or the Sprocket might not print.

    Replace the paper cover, and then resend the print job.

    Use this link: https://support.hp.com/in-en/product/hp-sprocket-2-in-1/17261493/document/c05938618 for your reference.
    If the issue persists, I would personally suggest you contact our HP phone support for one on one interaction. 
    Please use the following link to create yourself a case number, then call and it may help speed up the call process:
    Step 1. Open link: www.hp.com/contacthp
    Step 2. Sign in / sign in as a guest
    Step 3. Enter the product number or select to auto detect
    Step 4. Scroll down to “Still need help? Complete the form to select your contact options”
    Step 5. Scroll down and click: HP contact options – click on Get phone number and phone number appear.
    Keep me posted on further assistance. Hope that helps! 
    If the information I’ve provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that’ll help us and others see that we’ve got the answers!
    Have a great day ahead!

    Raj1788I am an HP Employee 
    Raj1788 le

laissez un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés