HP Sprocket inutilisable avec l'application sprocket sur l'iphone 4s

Publié par StevenGerrard2 le

Après l'installation et le démarrage de l'application sprocket sur ihone 4s, il n'est pas possible de cliquer sur le bouton d'accord car le bouton n'est que partiellement visible à l'écran et impossible de cliquer

Article plus ancien Message plus récent

3 commentaires

  • Hello, I understand you cannot accept the license agreement in the Sprocket app.  The sprocket manual shows the supported hardware and the iPhone 4s is not listed as a compatible device.  http://h10032.www1.hp.com/ctg/Manual/c05280005 Installing Mobile App To use your HP Sprocket Printer with your mobile device, you must download the companion HP Sprocket app from the App Store® or on Google Play™. To download the sprocket app, visit hpsprocket.com/start. There, you will be directed to the appropriate app store for your device. • The sprocket app is supported by Android™ devices using OS v4.4 and above and compatible with iPhone 7 Plus, iPhone 7, iPhone SE, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPod touch (6th generation), iPad Pro (10.5-inch), iPad Pro (9.7- inch), iPad Pro (12.9-inch) 2nd generation, iPad Pro (12.9-inch) 1st generation, iPad Air 2, iPad Air, iPad (5th generation), iPad (4th generation), iPad mini 2, iPad mini 3, iPad mini 4. Regards,StretchMusic

    I am an HP EmployeeRegards,StretchMusicIf the answer provided resolves your issue please press the thumbs up button in order to make the answer available to others.

    StretchMusic le
  •  Thanks for your help but it does not fix the issue. All other apps working correctly and I never had similar problems with other apps. Restarting smartphone and reinstall HP sprocket app does not solve the indicated issue which is still remaining. HP sprocket app version is 2.19.1, iOS version is 9.3.5 

    StevenGerrard2 le
  • @StevenGerrard2
    Welcome to HP Support Forums.
    I came across your post and would like to assist you.
    I understand that you’re unable to complete the setup of the HP Sprocket app on your iPhone 4s because the agree button is only partly seen in the display. This makes it impossible to click on the agree button.
    This appears to be an issues because of the DPI (Dots per inch) in the iPhone’s display. The DPI settings are not in sync to support the HP Sprocket app. Let me know if you’re able to install and use other apps in your iPhone correctly. 
    Secondly, I suggest you to uninstall the HP Sprocket app from your iPhone. Then restart the iPhone and try to reinstall the HP Sprocket app and check if it allows to click on the agree.
    NOTE: The HP Sprocket app requires iOS 9.0 or later.
    I sincerely hope this information helps. Please feel free to keep me posted for further assistance.
    Good luck!

    MKazi le

laissez un commentaire

Veuillez noter que les commentaires doivent être approuvés avant d'être publiés