l'imprimante ne se connecte pas au Web et il est indiqué de charger du papier dans le bac principal lorsqu'il est chargé de papier
l'ordinateur dit que l'essai principal est vide
Publié par Michigan1180 le
← Article plus ancien Message plus récent →
Thank you for posting on HP Support Community.
Don’t worry as I’ll be glad to help, I have a few troubleshooting steps we could try to fix the issue:
Step one: Reset the All-in-One
With the printer turned on, disconnect the power cord from the rear of the printer.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the printer.
Turn the printer on.
Step two: Print a self-test report
Print a self-test report. See the section on how to use these solutions at the beginning of this document.
If the self-test report prints, try printing the original document again. If the issue is resolved, there is no need to continue troubleshooting.
If the issue persists, continue with the next solution.
If the self-test report does not print, continue with the next solution.
Check the condition of the paper, and then reload it
Remove the stack of paper from the tray.
Check for obstructions inside the tray. Use a flashlight to view the mechanism inside the tray to make sure that nothing blocks the paper from engaging with the rollers. Even small pieces of paper can cause paper feed issues.
NOTE: If you find obstructions in the paper path, skip to the section on cleaning the rollers.
Examine the condition of the paper, and then replace any ripped, dusty, curled, wrinkled, or bent paper.
Make sure that all the paper in the stack is the same size and type. Never load mixed types of paper in the tray. The product can only process one type of paper at a time.
Tap the stack of paper on a flat surface to align the edges.
Make sure that the stack of paper contains no fewer than 10 sheets and no more than 25 sheets of paper.
Hope this helps! Keep me posted for further assistance.ECHO_LAKE I am an HP Employee
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.