El visor no se cierra

Publicado por kr0wsbud en

Recibí este dispositivo en Navidad, lo encendí, abrí el visor y tomé algunas fotos. Cuando fui a imprimir desde mi dispositivo móvil, presioné el visor hacia abajo pero no se quedó. No quiero forzarlo, ya que una simple pulsación para abrir y cerrar es lo que dicen las instrucciones. Por favor avise. gracias.

Entrada antigua Publicación más reciente

4 comentarios

  • Poor technical support, I would have thought most people would have refered to their users manual before trying here.The advice offered here is beyound basic.

    Mac891 en
  • None of the HP suggestions seem to show an understanding of the problem. The view finder does not close. Resetting the printer does not help.

    suns143 en
  • @mashloh

    It looks like you were interacting with Barachiel, but he is out for the day & I’ll be glad to help you out. I’m KrazyToad & I’m at your service. 
    This seems to be an issue with the ViewFinder locking mechanism. I would request you to contact our Phone Support for Service Options
    Step 1. Open link: www.hp.com/contacthp/
    Step 2. Enter Product number or select to auto detect 
    Step 3. Scroll down to “Still need help? Complete the form to select your contact options”
    Step 4. Scroll down and click: HP contact options – click on Get phone number and phone number appear.
    Keep me posted if you need further assistance
    Thank you 🙂
    If the information I’ve provided was helpful, give us some reinforcement by clicking the “Solution Accepted” 

    KrazyToadI Am An HP Employee
    KrazyToad en
  • @kr0wsbud
    Welcome to HP Support Forums. 🙂 
    I understand that you have an HP Sprocket 2-in-1. I read that after you clicked some pictures, you tried to print them from the sprocket. When you press the viewfinder down, it will not stay. Not to worry, I’ll be glad to assist you in this case.
    I did some research on this case and came across this HP document. Please attempt the steps mentioned in “What if the instant photo does not print when using the camera?”. Thes steps should get the printing to life again. 
    Hope this information helps. Let me know the outcome. All the best! 🙂

    MKazi en

Deja un comentario