Sprocket deja de imprimir

Publicado por marley17oc en

¡Hola! Mi impresora Sprocket está enchufada y cargando mientras la uso. Cada vez que intento imprimir una foto desde mi teléfono, la rueda dentada deja de imprimir a la mitad y se apaga. No he encontrado la manera de hacer que la rueda dentada siga imprimiendo sin cortar la mitad de la foto. Por favor, ayuda.


Entrada antigua Publicación más reciente

1 comentario

  • @marley17oc, Welcome to HP Support Community!
     
    Follow the steps below to resolve the issue-
     
    Upgrade the Sprocket firmware
    HP regularly releases firmware updates. Upgrading the firmware might resolve the issue.

    Make sure the Sprocket is on and your mobile device is connected to the Internet.

    On your mobile device, open the HP sprocket app.

    Tap the Menu icon , and then tap sprocket.

    Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.

    Under the Status section, locate Battery.

    If the battery charge is 25% or higher, continue with these steps.

    If the battery charge is 24% or lower, charge the battery for at least 30 minutes, and then continue with these steps.

    In Printer Settings, look for a firmware upgrade.

    If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.

    If a firmware upgrade option does not display, the firmware is up-to-date.

    Send a print job.
     
    If the issue persists, Reset your mobile device and Sprocket

    Turn off your mobile device, and then turn it back on.

    Turn on the Sprocket.

    Remove the Paper Cover, and then use a narrow object, such as a pen or paperclip, to press and hold the Reset button for 3 seconds until the Sprocket turns off.
    note:
    The location of the Reset button varies by Sprocket model. Typically, the button is located underneath the Paper Cover, but can also be found on the outside next to the charging port.

    Example of resetting the HP Sprocket Select Photo Printer

    Turn on the Sprocket.

    Hope this helps! Keep me posted. 
     
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution. Click the “Kudos/Thumbs Up" on the bottom right to say “Thanks” for helping!

    TEJ1602 I am an HP Employee
    TEJ1602 en

Deja un comentario