piñón calidad de impresión tono rosa

Publicado por bobriensan en

Acabo de configurar mi nuevo hp sprocket. Seguí todas las instrucciones, actualicé el firmware, usé la tarjeta de papel/azul que venía en la caja. Las 3 fotos que he impreso hasta ahora tienen un tono rosado muy distintivo. He mirado los pasos de solución de problemas, pero nada está arreglando la calidad. Una de las fotos fue tomada por mí con mi iphone6, por lo que la calidad de la imagen debería ser muy nítida. Muy decepcionante. ¿Cómo se puede arreglar esto?

Entrada antigua Publicación más reciente

7 comentarios

  • Hi @bobriensan,
    Thanks for replying to the HP Support Forums,
    I have brought your issue to the attention of an appropriate team within HP. 
    They will contact you shortly and likely request information from you in order to look up your case details or product serial number. 
    Please look for a private message from an identified HP contact. 
    Additionally, keep in mind not to publicly post personal information (such as serial numbers and case details).
    Have a great day.

    Raj1788I am an HP Employee 
    Raj1788 en
  • I did call the support line and they said that the HP Sprocket is not eligible for phone support.

    bobriensan en
  • Hi @bobriensan,
    Thanks for the reply.
    As you have already tried these steps and still having the issue, I would personally suggest you contact our HP phone support for further assistance.
    If your product is Out of warranty, then remember to choose the paid options to get the tech support number.
    They might have multiple options to help you on this.
    Please use the following link to create yourself a case number, then call and it may help speed up the call process:
    Step 1. Open link: www.hp.com/contacthp
    Step 2. Enter Product number or select to auto detect
    Step 3. Scroll down to “Still need help? Complete the form to select your contact options”
    Step 4. Scroll down and click: HP contact options – click on Get phone number and phone number appear.
    They will be happy to assist you immediately.
    Keep me posted on any other assistance.
    Hope that helps! Let me know 🙂
    Please click “Accepted as Solution” on the post that solves your issue to help others find the solution. 
    To show appreciation for my help, please click the “Thumbs Up Icon” below!

    Raj1788I am an HP Employee 
    Raj1788 en
  • This did not fix the problem, in fact after resetting it’s printing out even more pink than before. Please answer my questions: 1. Is this a Printer problem, in which case I will return the printer for a replacement. 2. Or is it the paper that came with the printer, which would be unfortunate as paper is relatively expensive and I’ve already wasted nearly all the paper that came with the printer. 

    bobriensan en
  • Hi @bobriensan,
    Thanks for the reply.
    Please follow the below steps.
    If the printer does not print when you send a print job or turn on when you press the power button, reset the printer with a straight pin to clear any errors.

    Turn on the printer.

    Locate the reset button near the charging port.
    Figure: Locating the reset button

    Gently insert the straight pin into the reset button access point, and then press the reset button for 3 seconds.
    The printer resets and turns off.

    Turn on the printer.

    Do get back to me as I have a few more tricks up my sleeve. Said that, if I have helped you resolve the issue.
    Feel free to give me a virtual high-five by clicking the ‘Thumbs Up’ icon followed by clicking on ‘Accepted as Solution’
    Have a great day Ahead!

    Raj1788I am an HP Employee 
    Raj1788 en

Deja un comentario