Mi impresora Sorocket no imprime.

Publicado por lgyrych en

Conecté mi bluetooth a mi impresora Sprocket y decía que necesitaba actualizarla. Permití que se actualizara y fui a imprimir mi imagen y no se imprimió. A continuación, tenía un mensaje de error que decía que necesitaba papel, sin embargo, ya tenía papel. Puse un nuevo paquete y sigue diciendo el mismo mensaje. Hace el sonido como si estuviera imprimiendo, pero no lo es. Justo antes de que se imprima, la luz parpadea y luego, después de que aparezca la luz roja. ¿Qué hago?


Entrada antigua Publicación más reciente

1 comentario

  • @lgyrych
     
    Thank you for being a part of HP Forums. This is a great place to get support, find answers and tips to your technical queries.

    Removing the photo papers, checking and clearing any stuck photo paper from the paper tray may resolve the issue. Let’s try these steps:
    1.) On the HP sprocket app, tap OK to clear the error message.
    2.) Turn off the printer.
    3.) Remove the paper cover by sliding it away from the output slot, and then set it aside.
    Figure : Removing the paper cover
     
     

    Slide the paper cover

    Remove the paper cover

    4.) Remove the stack of photo paper from the input tray.
    5.) Inspect the input tray for stuck photo paper.

    If there is stuck photo paper, use your fingernail to pry it loose, and then discard it.

    If there is no stuck photo paper, remove a single sheet of photo paper from the bottom of the stack, and then discard it.

    6.) Reload the photo paper with the HP logos facing down.
    Figure : Reloading the photo paper

    7.) Align the paper cover with the tracks on the outside of the printer, and then slide the paper cover toward the output slot until it is firmly seated.
    8.) Turn on the printer.
    9.) Resend the print job.
    If the issue persists, repeat the steps in this document until you are able to print.​​​​​​​
    Let me know how it goes!
     
    If the information I’ve provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that’ll help us and others see that we’ve got the answers!
    Have a great day!
     

    Senan6806 I am an HP Employee

    senan6806 en

Deja un comentario

Tenga en cuenta que los comentarios deben aprobarse antes de que se publiquen