No puedo agregar mi impresora Sprocket Studio a la aplicación. Ya tengo el Sprocket 200 instalado en el

Publicado por NavyMom32 en

Tengo el Sprocket 200 instalado en la aplicación y quiero agregar mi Sprocket Studio y se empareja, pero cuando intento agregarlo, dice que no se encuentra. ¡Por favor ayuda! Estoy usando un Samsung Galaxy Note 10 Plus.


Entrada antigua Publicación más reciente

1 comentario

  • @NavyMom32
     
    Welcome to the HP support community.
     
    Reset your mobile device and Sprocket

    Turn off your mobile device, and then turn it back on.

    Turn on the Sprocket.

    Remove the Paper Cover, and then use a narrow object, such as a pen or paperclip, to press and hold the Reset button for 3 seconds until the Sprocket turns off.
    note:
    The location of the Reset button varies by Sprocket model. Typically, the button is located underneath the Paper Cover, but can also be found on the outside next to the charging port.

    Example of resetting the HP Sprocket Select Photo Printer

    Turn on the Sprocket.

    Upgrade the Sprocket firmware

    Make sure the Sprocket is on and your mobile device is connected to the Internet.

    On your mobile device, open the HP sprocket app.

    Tap the Menu icon , and then tap sprocket.

    Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.

    Look for a firmware upgrade.

    If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.

    If a firmware upgrade option does not display, the firmware is up-to-date.

    You can refer this HP document for more assistance:- Click here
     
    I hope that helps.
    To thank me for my efforts to help you, please mark my post as an accepted solution so that it benefits several others.
    Cheers.
     

    Sandytechy20 I am an HP Employee
    sandytechy20 en

Deja un comentario