HP Sprocket 200 no se enciende

Publicado por a_fx en

Tengo un HP Sprocket 200, cuando presiono el botón de encendido no se enciende y no aparece ninguna luz. He intentado mantener presionado el botón de encendido y simplemente presionarlo, pero nada parece funcionar. También he actualizado mi teléfono y la aplicación para ver si eso ayudaría, pero no hizo ninguna diferencia.


Entrada antigua Publicación más reciente

1 comentario

  • Hi @a_fx Welcome to the HP Support Community. I’d be happy to assist you with the sprocket issue.  Appreciate you trying the steps. Please try charging the printer - The battery might not have enough power to turn on. Charge the printer for at least 30 minutes, disconnect it, and then turn on the printer. 1.) Connect the USB cable to the printer, and then connect the other end to a power source with at least 2 AMPs, such as a wall adapter or USB-capable power strip.  2.) Charge the printer for at least 30 minutes or until the Charging Indicator light turns green.3.) Disconnect the USB cable from the printer.4.) Turn on the printer. Also, try a factory reset - 1. Hold the power button for about 7 seconds total. After 3 seconds, the Status LED light will turn off to indicate the printer is shutting down; continue to hold the Power button until the LED lights start to flash.2. Release the power button. The LEDs will continue blinking for about 6 seconds.3. While the LEDs are blinking, press and release the power button. The device will remain off until you power on again. 4. Power on; the printer will be reset to factoring settings. After a factory reset, all settings are reset to factory defaults (Custom Name, LED color, Sleep Time, Auto-Off, etc.)  Hope this helps! Keep me posted.  Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping! Have a great day! 

    Asmita I am an HP Employee
    asmita6658 en

Deja un comentario