Black Lines Through Prints

Posted by CarterGottschal on

Hello,
I recently bought an HP sprocket. I used the first time, being sure to include the calibration sheet face-down in and printed the first picture fine. Theven second time I printed a picture, the photo came out with black lines down it. I then reset the sprocket with a pin, let it cool down for a bit, and presumed to try again using the calibration sheet face down again. I was disappointed to get the same black lines down the picture. I have tried different images as well and still there are black lines down my pictures. I am using genuine HP sprocket zink paper and like I said, I have tried recalibration and giving it time to cool down. I have wasted 4 prints and unhappy, I would appreciate some help, my attempts to contact HP over phone have failed. I look forward to your response.
Much Thanks,
Carter Gottschalk

Older Post Newer Post

4 comments

  • Did the replacement printer solve this? I can return my to Best Buy this evening as I just bought it. First photo, B&W: There is a brownish hue to it (no lines).Second photo (color):  Bad Lines perpendicular to the paper path, colors are off (looks like a greenish tint to it, reds are washed out. I’m not doing any edits in the HP Sprocket app, taking a photo that I’d processed in LR and printing it. In both cases, there is resizing going on in the HP Sprocket app.

    PhotoBiker on
  •  
    @CarterGottschal
     
    I thank you for the reply.
     
    Glad to know that you’re getting the replacement printer.
     
    You can reach out to HP forum for any issues on your HP products.
     
    Cheers, have a nice day 🙂

    Regards,Sizzlingsum_13I am an HP Employee

    Sizzlingsum_13 on
  • Hello @Sizzlingsum_13,Thank you for your suggestion, but as I stated in my post, I already did all the steps listed in the help you gave me. I was very careful to let it cool down, use the right paper, and also to use the blue sheet to calibrate/clean the roller. I even called hp and they couldn’t find any other troubleshooting to do. I believe my device is just deffective, but I am being sent a new one. Many thanks.

    CarterGottschal on
  • Hello@CarterGottschal
    Welcome to the HP Forums.I would like to take a moment and thank you for using this forum, it is a great place to find answers.As I understand you have print quality issues on your sprocket printer.I’ll be more than glad to help you out.
     
    I recommend you try the steps from the link below and check if that fixes the issue: http://hp.care/2jBMIeO (Refer What can I do to improve print quality? section)
     
    Hope this helps, for any further queries reply to the post and feel free to join us again.
     
    Cheers, have a nice day.
     
    If this helps, please mark this as “Accepted Solution” as it will help several others with the same issue to get it resolved without hassles.To simply say thanks, please click the "Thumbs Up" button to give me a Kudos to appreciate my efforts to help.

    Regards,Sizzlingsum_13I am an HP Employee

    Sizzlingsum_13 on

Leave a comment