Sprocket won't stop printing and it prints blank, only way to stop is to reset

Posted by freemaneng on

Sprocket won't stop printing and it prints blank, only way to stop is to reset

Older Post Newer Post


  • Same for me. I’ve got a Sprocket plus (B9:F1), software version 1.0.5, material version 6. I don’t have any possibility to update the firmware in the settings as the possibility isn’t showing up.
    The paper has been installed as recommended. When I want to print only one picture, the orange paper comes out which is normal but then all the paper sheets are coming out and all white :(

    Virginie on
  • The printer settings is “greyed” out. I can’t select printer settings.Is there a tech support phone number I can call?

    freemaneng on
  • @freemaneng
    Thank you for joining the HP Community
    Upgrade the Sprocket firmware
    HP regularly releases firmware updates. Upgrading the firmware might resolve the issue.

    Make sure the Sprocket is on and your mobile device is connected to the Internet.

    On your mobile device, open the HP sprocket app.

    Tap the Menu icon , and then tap sprocket.

    Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.

    Under the Status section, locate Battery.

    If the battery charge is 25% or higher, continue with these steps.

    If the battery charge is 24% or lower, charge the battery for at least 30 minutes, and then continue with these steps.

    In Printer Settings, look for a firmware upgrade.

    If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.

    If a firmware upgrade option does not display, the firmware is up-to-date.

    Send a print job.
    Keep me posted, how it goes!
    If the information I’ve provided was helpful, give us some reinforcement by clicking the Accepted Solution and Kudos buttons, that’ll help us and others see that we’ve got the answers!
    Have a great day!

    Raj1788I am an HP Employee 
    Raj1788 on

Leave a comment