Cyber Week Sale

Save up to 35% on doorbusters. Shop and ship early for holiday delivery and get FREE shipping storewide.

Save up to 35% on doorbusters.

SHOP

Sprocket color adjustment

Posted by FriendlySkies1 on

No problems setting hp my Sprocket -yea! However, my green trees are printing yellow Is there a way to adjust this? The preview color is fine.

Older Post Newer Post

4 comments

  • Just got my printer today and printer a few pictures.  I’m extremely disappointed to say the least.  These pictures look like they are something that was printed on 110 film from the 1980’s and sitting in a sticky film photo album.  Just downloaded  your suggested firmware to fix the yellow hue, but did nothing.  Same printed picture looks exactly the same.  While not super expesive, have visible pictures are not at all worth the money. any other ideas before my printer and 10 boxes of paper go back to the store after less that 24 hours???

    Cfelty2 on
  • although this is an old thread i too had similar color issues/yellow—-the color accuracy of the prints were greatly improved by updating the firmware of the sprocket—this is from another thread on how to update firmware "Secondarily, today we released an updated firmware code that does have color map improvements.  You can upgrade by following the instructions below: First, make sure the Sprocket is charged to at least 75% battery and powered on.Ensure the Sprocket is paired to your mobile device.On your mobile device, open the HP Sprocket app and go to menu → sprocket → Printers; A ‘blue’ firmware update link will be present or a pop-up message will appear if an update is available.After clicking the link or upgrade prompt, follow onscreen process/instructions."

    esg121 on
  • Hi. Yes, I did use the calibration card as instructed. with the ten sheet starter pack. I made sure it and the paper were loaded properly. The calibration card ejected first then the photo. Another pic I printed had some darker green that printed ok, but the lighter greens were still more yellow. And a magenta flower printed more orangey than pink.

    FriendlySkies1 on
  • Hi,Thanks for using the HP Forums. Have you calibrated the photo pack with the calibration card? Please check this out on how to setup, connect and print: http://h30434.www3.hp.com/t5/sprocket/Sprocket-How-to-setup-and-Use-the-HP-Sprocket-Printer-amp/td-p… Hope that helps.

    I am an HP EmployeeAlthough I am speaking for myself and not for HP.Please click “Kudos Thumbs up” as an encouragement and “Accept as solution” if this has helped solved your problem.

    greenturtle on

Leave a comment