Sprocket 200 power button will not turn off

Posted by 13KatieB on

The manual power button on my Sprocket 200 printer does not work. I don’t want to wait the hour to turn off my printer and drain more battery. I’ve tried holding the power button down, and it still will not turn off manually. 


Older Post Newer Post

1 comment

  • Hi @13KatieB
    Welcome to the HP Support Community. I’d be happy to assist you. Let us try these steps to resolve this issue:
     
    Hardware Reset

    Make sure the printer is on.

    Remove the paper cover.

    Locate the Reset button.

    With a paperclip or pin, press and hold the Reset button until the Charging Indicator light turns off.
    The printer resets and turns off.

    Replace the paper cover, and then turn on the printer.

     Upgrade the Sprocket firmware

    Make sure the Sprocket is on and your mobile device is connected to the Internet.

    On your mobile device, open the HP sprocket app.

    Tap the Menu icon , and then tap sprocket.

    Tap Manage Printers, make sure your Sprocket is selected, and then tap Printer Settings.

    Under the Status section, locate Battery.

    If the battery charge is 25% or higher, continue with these steps.

    If the battery charge is 24% or lower, charge the battery for at least 30 minutes, and then continue with these steps.

    In Printer Settings, look for a firmware upgrade.

    If a firmware upgrade displays, tap Get Firmware Upgrade, and then follow the on-screen prompts to complete the update.

    If a firmware upgrade option does not display, the firmware is up-to-date.

    Keep me posted for any other assistance.
     
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
    Have a great day! 

    KUMAR0307 I am an HP Employee
    Kumar0307 on

Leave a comment