Every picture I print comes out with a blue tint to it and looks terrible. I did the firmware update and it still prints with the blue. How can I fixe this?
Sprocket 200 pictures look blue
Posted by 2830760 on
← Older Post Newer Post →
Posted by 2830760 on
Every picture I print comes out with a blue tint to it and looks terrible. I did the firmware update and it still prints with the blue. How can I fixe this?
← Older Post Newer Post →
© Copyright C&A Marketing, Inc. is the manufacturer of the HP® Sprocket®, under license from HP, Inc. HP and Sprocket trademarks are owned by HP Inc. or its affiliates. ZINK® Technology and ZINK® Trademarks are owned by ZINK Holdings LLC., used under license.
@gracek14
If you have tried the steps mentioned in this document - Improving Print Quality, and the issue persists, try resetting the printer:
Make sure the printer is on.
Remove the paper cover.
Locate the Reset button.
With a paperclip or pin, press and hold the Reset button until the Charging Indicator light turns off.
The printer resets and turns off.
Replace the paper cover, and then turn on the printer.
Try printing to check the print quality.
If the issue persists, this could be a hardware issue, please reach out to the HP Support in your region regarding the service options for your printer.
KUMAR0307 I am an HP EmployeeKeep me posted for any other assistance.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!
Have a great day!
I also have the same issue. I have already tried all the steps linked above and the photos are still printing with a blue hue and washing out the color of the people in the photos.
@2830760
Welcome to the HP Support Community.
Try the steps from here: https://support.hp.com/us-en/product/hp-sprocket-200-printer-series/21625473/document/c05660842
Let me know if this helps.
If the information I’ve provided was helpful, give us some reinforcement by clicking the “Accept as solution” button, that’ll help us and others see that we’ve got the answers!
Thanks!
Have a great day!
I am an HP Employee